2001 TOYOTA PRIUS cylinder bolt

F09780
F12390
SST
BR±34
± BRAKEREAR DRUM BRAKE
2001 PRIUS (RM778U)
(b) Using needle±nose pliers, disconnect the parking brake
cable from the parking brake lever, and remove the rear
shoe.
6. REMOVE PARKING BRAKE LEVER
(a) Remove the C±washer.
(b) Remove the parking brake lever from the rear shoe.
7. REMOVE WHEEL CYLINDER
(a) Using SST, disconnect the brake line. Use container to
catch the brake fluid.
SST 09751±36011
Torque: 15 N´m (155 kgf´cm, 11 ft´lbf)
(b) Remove the bolt and the wheel cylinder.
Torque: 10 N´m (100 kgf´cm, 7 ft´lbf)
8. DISASSEMBLE WHEEL CYLINDER
(a) Remove the 2 boots from the wheel cylinder.
(b) Remove the 2 pistons from the wheel cylinder.
(c) Remove the spring from the wheel cylinder.
(d) Remove the 2 piston cups from each piston.

F12238
Transponder Key Coil
Column Upper BracketKey Cylinder
Column Upper Clamp Key Unlock
Warning Switch
Tapered±head Bolt Ignition Switch Break Away Capsule
Energy Absorbing
Plate
Energy Absorbing
Plate Guide Energy Absorbing
Clip
Tilt Lever Lock BoltBreak Away Bracket
Snap Ring
Column Tube
Sub±assembly
Tilt Lever
No. 1 Tilt Steering
Support Reinforce Tilt Steering
Adjust Nut
Torsion Spring Steering Pawl Set Bolt No. 1 Tilt Steering
Support Collar Tilt Steering Support
Washer
Main Shaft Assembly





Energy Absorbing
Plate


Snap Ring


Tilt Sub Lever
Main Shaft Bushing
13 (130, 9)
9.5 (100, 87 in.´lbf)
5.4 (55, 48 in.´lbf)
N´m (kgf´cm, ft´lbf): Specified torque
Non±reusable part
Key Interlock Solenoid
No. 2
Tilt Lever
Lock Bolt
Molybdenum disulfide lithium base grease
± STEERINGTILT STEERING COLUMN
SR±5
1578 Author: Date:
2001 PRIUS (RM778U)

H15435
H15436
BO±14
± BODYFRONT DOOR
2001 PRIUS (RM778U)
14. REMOVE WINDOW REGULATOR
(a) Disconnect the connector.
(b) Remove the 2 bolts from the window regulator.
Torque: 4.9 N´m (50 kgf´cm, 43 in.´lbf)
(c) Remove the 4 bolts and window regulator.
Torque: 8.3 N´m (85 kgf´cm, 74 in.´lbf)
HINT:
At the time of reassembly, please refer to the following item.
Apply MP grease to the window regulator.
NOTICE:
At the time of reassembly, please refer to the following
item.
Do not apply grease to the spring of the window regulator.
15. REMOVE DOOR LOCK
(a) Disconnect the control cable from the clamp.
(b) Disconnect the 2 links from the outside handle and key
cylinder.
(c) Disconnect the connecter.
(d) Remove the bolt.
Torque: 4.9 N´m (50 kgf´cm, 43 in.´lbf)
(e) Remove the 3 screws and door lock.
Torque: 4.9 N´m (50 kgf´cm, 43 in.´lbf)
HINT:
At the time of reassembly, please refer to the following item.

Apply adhesive to the 3 screws.
Part No. 08833±00070, THREE BOND 1324 or equiva-
lent

H10815
± BODYFRONT DOOR
BO±15
2001 PRIUS (RM778U)

Apply MP grease to the sliding and rotating parts of the
door lock.
16. REMOVE OUTSIDE HANDLE
(a) Remove the 2 bolts and outside handle.
Torque: 5.4 N´m (55 kgf´cm, 48 in.´lbf)
(b) Remove the key cylinder from the handle.

H15434
BO±22
± BODYREAR DOOR
2001 PRIUS (RM778U)
HINT:
At the time of reassembly, please refer to the following item.
Apply MP grease to the sliding and rotating parts of the door
lock.
19. REMOVE OUTSIDE HANDLE
(a) Remove the 2 bolts.
Torque: 5.4 N´m (55 kgf´cm, 48 in.´lbf)
(b) Remove the outside handle and key cylinder.

BO3QS±01
H15480
H15418
H15419
H15420
BO±26
± BODYLUGGAGE COMPARTMENT DOOR AND HINGE
2001 PRIUS (RM778U)
REMOVAL
1. REMOVE LUGGAGE COMPARTMENT DOOR TRIM
Remove the 10 clips and luggage compartment door trim.
2. REMOVE LUGGAGE COMPARTMENT DOOR LOCK
(a) Remove the 2 bolts and luggage compartment door lock.
Torque: 5.4 N´m (55 kgf´cm, 48 in.´lbf)
(b) Disconnect the link and cable from the lock.
3. REMOVE LUGGAGE COMPARTMENT DOOR OUTER
GARNISH
(a) Remove the 4 nuts.
(b) Remove the luggage compartment door outer garnish
and key cylinder.
4. REMOVE LICENCE PLATE LIGHT
(a) Disconnect the connector.
(b) Remove the licence plate light as shown in the illustration.
(c) Employ the same manner described above to the other
side.
(d) Using a clip remover, remove the clamps.
5. REMOVE LUGGAGE COMPARTMENT DOOR
Remove the 4 bolts luggage compartment door.
Torque: 8.3 N´m (85 kgf´cm, 74 in.´lbf)
6. REMOVE LUGGAGE REAR FLOOR FINISH PLATE
(a) Using a clip remover, remove the 4 clips.
(b) Remove the rear floor finish plate.
7. REMOVE LUGGAGE COMPARTMENT DOOR WEATH-
ERSTRIP