H15434
BO±22
± BODYREAR DOOR
2001 PRIUS (RM778U)
HINT:
At the time of reassembly, please refer to the following item.
Apply MP grease to the sliding and rotating parts of the door
lock.
19. REMOVE OUTSIDE HANDLE
(a) Remove the 2 bolts.
Torque: 5.4 N´m (55 kgf´cm, 48 in.´lbf)
(b) Remove the outside handle and key cylinder.
BO3QS±01
H15480
H15418
H15419
H15420
BO±26
± BODYLUGGAGE COMPARTMENT DOOR AND HINGE
2001 PRIUS (RM778U)
REMOVAL
1. REMOVE LUGGAGE COMPARTMENT DOOR TRIM
Remove the 10 clips and luggage compartment door trim.
2. REMOVE LUGGAGE COMPARTMENT DOOR LOCK
(a) Remove the 2 bolts and luggage compartment door lock.
Torque: 5.4 N´m (55 kgf´cm, 48 in.´lbf)
(b) Disconnect the link and cable from the lock.
3. REMOVE LUGGAGE COMPARTMENT DOOR OUTER
GARNISH
(a) Remove the 4 nuts.
(b) Remove the luggage compartment door outer garnish
and key cylinder.
4. REMOVE LICENCE PLATE LIGHT
(a) Disconnect the connector.
(b) Remove the licence plate light as shown in the illustration.
(c) Employ the same manner described above to the other
side.
(d) Using a clip remover, remove the clamps.
5. REMOVE LUGGAGE COMPARTMENT DOOR
Remove the 4 bolts luggage compartment door.
Torque: 8.3 N´m (85 kgf´cm, 74 in.´lbf)
6. REMOVE LUGGAGE REAR FLOOR FINISH PLATE
(a) Using a clip remover, remove the 4 clips.
(b) Remove the rear floor finish plate.
7. REMOVE LUGGAGE COMPARTMENT DOOR WEATH-
ERSTRIP
