2001 SUBARU OUTBACK suspension

1-32NOTE If the front part of the vehicle is damaged in an accident to the extent that the seatbelt pretensioner does not operate, contactyour SUBARU dealer as soon as possible.
Precautions against vehicle modification CAUTION
Do not perform any of the following modifications. Such modifi- cations can interfere with proper operation of the seatbelt perten-sioners. Attachment of any equipment (bush bar, winches, snow plow,
skid plate, etc.) other than SUBARU genuine accessory parts tothe front end. Modification of the suspension system or front end structure.
Installation of a tire of different size and construction from the
tires specified on the tire placard attached to the door jamb.
Always c onsult your SUBARU d ealer if you want to in stall any ac c es-
sory p arts to your vehic le.

Seat, seatbelt and SRS airbags1-75
–
CONTINUED –

Replacement of seat fabric or leather (only for vehicles with
SRS side airbags) Installation of additional fabric or leather on the front seat
(only for vehicles with SRS side airbags)
Installation of additional electrical/electronic equipment such
as a mobile two-way radio on or near the SRS airbag system
components and/or wiring is not advisable. This could interferewith proper operation of the SRS airbag system.
CAUTION
Do not perform any of the following modifications. Such modifi-cations can interfere with proper operation of the SRS airbag sys-tem. Attachment of any equipment (brush bar, winches, snow plow,
skid plate, etc.) other than SUBARU genuine accessory parts tothe front end. Modification of the suspension system or front end structure.
Installation of a tire of different size and construction from the
tires specified on the tire placard attached to the door jamb. Attachment of any equipment (side steps or side sill protec-
tors, etc.) other than SUBARU genuine accessory parts to theside body (only for vehicles with side airbags).
Always c onsult your SUBARU d ealer if you want to in stall any ac c essory
p arts to your vehic le.

7-26
Whenever suspension components, steering components, or
an axle are removed from a vehicle equipped with VDC, have an authorized SUBARU dealer perform an inspection of that system. The following precautions should be observed in order to
ensure that the VDC system is operating properly:
–All four wheels should be fitted with tires of the same size,
type, and brand. Furthermore, the amount of wear should bethe same for all four tires.– Keep the tire pressure at the proper level as shown on the
label attached to the vehicle ’s door pillar.
– Use only the special temporary spare tire to replace a flat
tire.
When d riving on slip p ery road s or making sud d en tur ns to avoid
ob stac les in the vehic le ’s p ath, c ertain situations may oc c ur where the
vehic le may slip sid eways or where the rear of the vehic le may swing
outward . When the VDC system d etermines either of t hese c irc um-
stanc es is ab out to oc c ur, it c ontrols — and op erates in c onjunc tion with
— the Anti-loc k Brake System and the Trac tion Contro l System to sup -
p ress sud d en c hang es in vehic le attitud e and motion , thus imp roving
d irec tional stab ility d uring d riving .
Anti-loc k Brake System (ABS) func tion:
The ABS c ontrols the b rake system elec tronic ally. I t p revents loc king
of the wheels so that d irec tional stab ility and ste ering wheel resp on-
siveness c an b e maintained even when b raking on sli p p ery surfac es.
In the unlikely event that a malfunc tion should oc c ur in the ABS, it will
still b e p ossib le to stop the vehic le using normal b raking .
Trac tion Control System (TCS) func tion:
The TCS limits sp inning of the d rive wheels on slip p ery surfac es; in
this, it help s ensure that an ap p rop riate d eg ree of trac tion and steer-
ing are maintained . The VDC op eration ind ic ator lig ht will turn on
when the TCS ac tivates. Vehic le Dynamic s Control
To assist in maintaining d irec tional stab ility, the VDC help s sup p ress
sid eways slip p ing of the vehic le when the steering wheel is turned
sud d enly or when c ornering on a slip p ery surfac e. T he VDC op eration