2001 SUBARU LEGACY brake

Maintenance and service11-57
–
CONTINUED –
3. Using a Phillip s sc rewd river, remove the up p er an
d lower sc rews
that sec ure the sid e c over of the rear c omb ination lig ht assemb ly.
4. Remove the b ulb soc ket from the rear c omb ination lig ht assemb ly
b y turning it c ounterc loc kwise.
HBB048BA
HBB025BA
5. Remove the b ulb from the soc ket.
Turn signal light: Pull the b ulb out of the soc ket.
Brake/tail light: Remove the b ulb from the soc ket b y p ushing it and
turning it c ounterc loc kwise.
6. Install a new b ulb in the soc ket.
7. Set the b ulb hold er into the rear c omb ination lig ht assemb ly and
turn it c loc kwise until it loc ks.
8. Fit the rear c omb ination lig ht assemb ly into the vehic le b od y and
tig hten the nuts from the interior of the vehic le.
9. Reinstall the lig ht b ulb rep lac ement servic e hole c overs.

11-58n
Back-up and brake/tail light bulbs
HBB025BA
HBB026BC
1. Unlatc h the rear c omb ination lig ht c over b y movin g the knob up -
ward . Op en the c over up .
2. Remove the b ulb soc ket from the rear c omb ination lig ht assemb ly
b y turning it c ounterc loc kwise.
3. Remove the b ulb from the soc ket b y p ushing it and turning c oun-
terc loc kwise. Install a new b ulb in the soc ket.
4. Set the b ulb hold er into the rear c omb ination lig ht assemb ly and
turn it c loc kwise until it loc ks.
5. Close the c over and latc h the loc k.
License plate light
HBB027BA
HBF013EA
1. Remove the mounting sc rews using a p hillip s sc rew d river.

Specifications12-7
–
CONTINUED –
Fuse panel Circuit
Fuse rating
615ASRS airb ag
715AFront fog lig ht
830AABS solenoid
915ARad io
Cloc k
1015ATrailer
1115AEng ine ig nition system
SRS airb ag
1210AIllumination b rig htness c ontrol
1315AFuel p ump
1410ARear wind ow wip er and washer
1530AWind shield wip er and washer
1620ABrake lig ht
1715AAir c ond itioner
1815ABac kup lig ht
Cruise c ontrol
ABS c ontrol
1920AMirror heater
Wip er d eic er
2020AAc c essory p ower soc ket
Seat heater

Specifications12-9
–
CONTINUED –
Fuse panel Circuit
Fuse rating
830AABS (VDC) solenoid
915ARad io
Cloc k
1015ATrailer
1115AEng ine ig nition system
SRS airb ag
1210AIllumination b rig htness c ontrol
1315AFuel p ump
1410ARear wind ow wip er and washer
1530AWind shield wip er and washer
1620ABrake lig ht
1715AAir c ond itioner
1815ABac kup lig ht
Cruise c ontrol
ABS (VDC) c ontrol
1920AMirror heater
Wip er d eic er
2020AMc Intosh aud io amp (if eq uip p ed )
2120AAc c essory p ower soc ket
Seat heater

12-14Bulb chart
Wattag e Bulb No.
Head lig ht GT and OUTBACK
Low b eam 12V –55W H1
Hig h b eam 12V –60W 9005 (HB3)
Exc ep t GT and OUTBACK 12V –60/55W 9007 (HB5)
Front turn sig nal 12V –27W 1156NA (Amb er)
Sp ot lig ht 12V –8W —
Dome lig ht 12V –8W —
Door step lig ht 12V –3.4W —
Parking and front sid e marker lig ht 12V –27/8W 1157NA (Amb er)
Front fog lig ht Exc ep t OUTBACK 12V –55W H3
OUTBACK 12V –51W 9006 (HB4)
Bac kup lig ht
Sed an 12V –27W 3156K
Station wag on 12V –27W 1156
Lug g ag e area lig ht 12V –13W —
Hig h mount stop lig ht
Sed an 12V –18W 921
Station wag on 12V –13W 912
Rear turn sig nal lig ht Sed an 12V –21W —
Station wag on 12V –21W R2172 7440
Brake/tail lig ht
Sed an 12V –27/8W 3157K
Station wag on 12V –27/8W 1157
Lic enc e p late lig ht Sed an 12V –5W 168
Station wag on 12V –3.8W or 5W 194 or 168
Trunk room lig ht 12V –5W W5W