MAINTENANCE OF YOUR 306 CABRIOLET
34
B
A
2
3
54
1
Rear lights
- Unscrew the wing nut inside the boot.
- Remove the plastic cover.
- Disconnect the connector Aby
pressing the metal bar.
- Disconnect the connector Bby
releasing the tab.
- Release the light unit.
- Change the faulty bulb. 1
Brake lights/side lights P21/5W.
2 Side lights R5W.
3 Rear fog lamp P21W.
4 Reversing lights P21W.
5 Direction indicators PY21W. Additional brake light This is fitted with long-life light-emit- ting diodes.
The bulbs must be repla- ced by bulbs of identical
specification and colour.
When refitting, ensure that the seal is clean, inorder to prevent water
entry.
MAINTENANCE OF YOUR 306 CABRIOLET
44
BODYWORK MAINTENANCE
To preserve the paintwork and the plastic trim on your vehicle, we recommend that you wash them
regularly,
- by hand, there are no specific pre-cautions to take;
- using a high pressure washer, always follow the recommenda- tions on the equipment (pressureand spraying distance).If there are areas of damage onthe vehicle (painted bumpers, orheadlamps), it is not recommen-ded to direct the high pressure jetonto them: wash the areas ofdamage by hand. Also avoid the entry of water into the locks. Waxing:
the regular use of wax
added to the washing water orapplied separately is strongly recom-mended, it protects the upper coats ofpaintwork against external attack. For all questions relating to the main- tenance of your vehicle, contact anapproved dealer who can advise youon quality products selected by ourdepartments. - Clean off, as soon as
possible, bird drop-pings, resinousdeposits, tar stainsand grease marks; (as
these all contain substanceswhich can cause serious damage to the paintwork).
- Brake briefly several times to expel any dampness from thebrake pads, when you are setting off after washing yourvehicle.
- Do not use a dry or abrasive cloth, or detergent or solventproducts to clean the doublelens, complex surface head-lamps as they are fitted withpolycarbonate glass covered ina protective finish.
- Do not use petrol, oil or cloth stain removers to clean thebodywork and plastic parts ofyour vehicle.
- To prevent the development of bodywork corrosion as a resultof accidental damage (stonechips, scratches etc.) have them
repaired swiftly.
