2001 MAZDA MODEL 626 reset

Form No. 8P95-EA-00G
Driving Your Mazda
5-91
Band selection
Select AM by pressing the AM button
and FM1 or FM2 by pressing the
FM1/2 button.
The selected mode will be indicated.
If FM stereo is being received, “ST”
will be displayed.NOTEIf the FM broadcast signal
becomes weak, reception
automatically changes from
STEREO to MONO for reduced
noise, and the “ST” indicator will
go out.
 Tuning
The radio has the following tuning
methods: Manual, Seek, Scan, Preset
channel, and Auto memory tuning.
The easiest way to tune stations is to
set them on preset channels.NOTEIf the power supply is interrupted
(fuse blows or the battery is
disconnected), the preset channels
will be canceled.
76Y032-008_a
Higher
frequency
Lower
frequency
Manual tuning
Turning the manual tuning knob will
change to a higher or lower frequency.

Form No. 8P95-EA-00G
Driving Your Mazda
5-93
76Y032-010Preset channel tuning
The six preset channels can be used to
store 6 AM and 12 FM stations.To set a channel first select AM, FM1,
or FM2. Tune to the station you want
and depress a channel preset button for
about 2 seconds until a beep is heard.
The preset channel number and station
frequency will be displayed.
The station is now held in the memory.
Repeat this operation for the other
stations and bands you want to store.
To tune one in the memory, select AM,
FM1, or FM2 and then press its
channel preset button. The station
frequency and the channel number will
be displayed.
NOTEIf the power supply is interrupted
(fuse blows or the battery is
disconnected), the preset channels
will be canceled.

Form No. 8P95-EA-00G
Driving Your Mazda
5-111
Inserting CDs into desired tray
number
1. Press and hold the load button forabout 2 seconds until a beep is
heard.
2. Press the channel preset button for the desired tray number within 5
seconds after the beep is heard.
3. When “In” is displayed, insert the
CD.
NOTEThe CD can not be inserted to the
desired tray number if the number
is already occupied.
76Y032-013 Playing
Press the CD play button to start
playing when a CD is in the unit.

Form No. 8P95-EA-00G
Driving Your Mazda5-116NOTEWhen the CD is ejected during
play, the next CD will be played
automatically.
Ejecting CDs from desired tray
number
1. Press and hold the CD eject buttonfor about 2 seconds until a beep is
heard.
2. Press the channel preset button for the desired CD number within 5
seconds after the beep is heard.
3. Pull out the CD. Multiple ejection
1. Press and hold the CD eject button
for about 2 seconds until a beep is
heard.
2. Wait 5 seconds or press the CD eject button again within 5 seconds
after the beep is heard.
3. Pull out the CD, then the next CD will be ejected.