SWITCHES
24
HEADLIGHT DIMMER AND TURNSIGNAL SWITCH
SV12010
For high beam, push the lever forward. Pull it back for low
beam. For the headlight flasher, pull it further back.
A blue light in the instrument cluster indicates high beam or
headlight flasher is on.
The headlight flasher works even when the headlight switch is
off.
SV12011
For signaling turns, move the lever up or down in the
conventional manner.
The ignition key must be in the ºONº position.
The turn signal is self±cancelling after a turn, but after a lane
change, you may have to cancel it by hand. You can also signal
a lane change by moving the turn signal lever partway and
holding it there.
If the green light in the instrument cluster flashes faster than
normal, it indicates that the front or rear turn signal bulb has
burned out. If this indicator light does not come on, the fuse
or the indicator light itself has probably failed.
ELECTRICAL COMPONENTS
275
LIGHT LOCATION
SV64015
Light Bulbs
Bulb No. W Type
1
Headlights (High beam) HB3 60 A
2Parking lights 168 5 D
3
Headlights (Low beam) D2R 35 B
4Fog lights HB4 51 C
5
Front turn signal lights ±±± 21 F
6Front side marker lights 168 5 D
SV64013
Light Bulbs Bulb No. W Type
1
High mounted stop light 921 16 F
2License plate lights 168 5 D
3Tail/stop lights 7443 5/21 E
4
Back±up lights 7440 21 F
5
Rear turn signal lights ±±± 21 F
6Rear side marker lights 168 5 D
7Tail/stop lights 7443 5/21 E
8
Trunk light 194 3.8 D
