2001 Lexus ES300 garage door opener

SECTION 1 ± 4
71
INSTRUMENTS AND CONTROLS
Interior equipment
Vanity mirrors71
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Interior light 75
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Personal light 77
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ignition switch light 79
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Clock 81
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . .
Cigarette lighter and ashtray 81
. . . . . . . . . . . . . . . . . . . . .
Power outlet 84
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Glove box 85
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\

Rear console box 87
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Garage door opener 88
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cup holder 93
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Overhead console box 95
. . . . . . . . . . . . . . . . . . . . . . . . . .
Auxiliary box 96
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Floor mat 97
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\

Luggage stowage precautions 99
. . . . . . . . . . . . . . . . . . .
VANITY MIRRORS

INTERIOR EQUIPMENT
72
14E001±1
Sun visor with garage door opener

INTERIOR EQUIPMENT
73
14E047
Sun visor without garage door opener
To use the vanity mirrors, swing the sun visor down
and open the cover.
The vanity lights come on when you open the cover.
Sun visors
14E062

INTERIOR EQUIPMENT
88
GARAGE DOOR OPENER
The garage door opener (HomeLinkUniversal
Transceiver) is manufactured under license from
HomeLink
 and can be programmed to operate
garage doors, gates, entry doors, door locks, home
lighting systems, and security systems, etc.
(a) Programming the HomeLink
14E065
 1Indicator light 2 Buttons
The HomeLink in your vehicle has 3 buttons and
you can store one program for each button.
To ensure correct programming into the HomeLink
,
install a new battery in the hand±held transmitter prior to
programming.

INTERIOR EQUIPMENT
89
The battery side of the hand±held transmitter must be
pointed away from the HomeLink
 during the
programming process.
For Canadian users, follow the procedure in
ªProgramming an entrance gate/Programming all
devices in the Canadian marketº.
1. Decide which of 3 HomeLink
 buttons you want to
program.
2. Place your hand±held garage transmitter 25 to 75
mm (1 to 3 in.) away from the surface of the HomeLink
.
Keep the indicator light on the HomeLink
 in view while
programming.
3. Simultaneously press and hold the hand±held garage
transmitter button along with the selected HomeLink

button.
4. When the indicator light on the HomeLink
 changes
from a slow to a rapid flash after 20 seconds, you can
release both buttons.
5. Test the operation of the HomeLink
 by pressing the
newly programmed button. If programming a garage
door opener, check to see if the garage door opens and
closes. If the garage door does not operate, identify if your
garage transmitter is of the ªRolling Codeº type. Press
and hold the programmed HomeLink
 button. The
garage door has the rolling code feature if the indicator
light (on the HomeLink
) flashes rapidly and then
remains lit after 2 seconds. If your garage transmitter is
the ªRolling Codeº type, proceed to the heading
ªProgramming a rolling code systemº.
6. Repeat steps 2 through 5 for each remaining
HomeLink
 button to program another device.
Programming a rolling code system
If your device is ªRolling Codeº equipped, it is
necessary to follow steps 1 through 4 under the
heading ªProgramming the HomeLink
º before
proceeding with the steps listed below.
1. Locate the ªtrainingº button on the ceiling mounted
garage door opener motor. The exact location and color
of the button may vary by brand of garage door opener.
Refer to the owner's guide supplied by the garage door
opener manufacturer for the location of this ªtrainingº
button.
2. Press the ªtrainingº button on the ceiling mounted
garage door opener motor.
Following this step, you have 30 seconds in which to
initiate step 3 below.

INTERIOR EQUIPMENT
903. Press and release the vehicle's programmed
HomeLink
 button twice. The garage door may open.
If the door does open, the programming process is
complete. If the door does not open, press and release
the button a third time. This third press and release will
complete the programming process by opening the
garage door.
The ceiling mounted garage door opener motor should
now recognize the HomeLink
 unit and be able activate
the garage door up/down.
4. Repeat steps 1 through 3 for each remaining
HomeLink
 button to program another rolling code
system.
Programming an entrance gate /
Programming all devices in the Canadian
market
1. Decide which of the 3 HomeLink buttons you want
to program.
2. Place your hand±held gate/device transmitter 25 to
75 mm (1 to 3 in.) away from the surface of the
HomeLink
.
Keep the indicator light on the HomeLink
 in view while
programming.
3. Press and hold the selected HomeLink
 button.
4. Continuously press and release (cycle) the
hand±held gate/device transmitter button every two seconds until step 5 is complete.
5. When the indicator light on the HomeLink
 changes
from a slow to a rapid flash after 20 seconds, you can
release both buttons.

INTERIOR EQUIPMENT
92
CAUTION
When programming the HomeLink Universal
Transceiver, you may be operating a garage door or
other device. Make sure people and objects are out
of the way of the garage door or other device to
prevent potential harm or damage.
 Do not use this HomeLink
 Universal Transceiver
with any garage door opener that lacks the safety
stop and reverse feature as required by federal safety
standards. (This includes any garage door opener
model manufactured before April 1, 1982.) A garage
door opener, which cannot detect an object,
signaling the door to stop and reverse, does not meet
current federal safety standards. Using a garage
door opener without these features increases risk of
serious injury or death.