COMFORT ADJUSTMENT
207
Conditions for memorized position activation
Ignition key ªONº and selector lever in ªPº position
All parts of the memorized positions can be activated.
However, if the brake pedal is being depressed, the
seat position will not change.
Key not in ignition switch and within 30 seconds of
opening driver's door.
The memorized position can be activated.
If any driving position memory switch is pushed while
one of the memorized driving position profiles is being
activated, the operation will stop.
To activate the system, push the desired button (ª1º or
ª2º) again.
The driving position memory control system cannot be
operated while the vehicle is moving.
If the vehicle's battery is disconnected, the computer's
memory will be erased and the memorized positions will
have to be set again.
ELECTRICAL COMPONENTS
465
64E086
1Beam angle gauge (vertical movement)
2Adjusting bolt A
3Beam angle gauge (horizontal movement)
4Adjusting bolt B
Before checking the headlight aim:
1. Be sure that the body around the headlight is not
deformed.
2. Park the vehicle on a level spot.
3. The driver gets into the driver's seat and puts the
vehicle in a state readying for a driving (with a full tank).
4. Bounce the vehicle several times.
Adjusting the headlight aiming
ELECTRICAL COMPONENTS
468
1Beam angle gauge (horizontal movement)
2Adjusting bolt A
3Adjusting bolt B
Before checking the headlight aim:
1. Be sure that the body around the headlight is not
deformed.
2. Park the vehicle on a level spot.
3. The driver gets into the driver's seat and puts the
vehicle in a state readying for a driving (with a full tank).
4. Bounce the vehicle several times.
Adjusting the vertical aiming
64E080
1. Turn the adjusting bolt A in either direction.
