Page 284 of 504

AUDIO
267
Station
swapping ± If the FM signal you are listening to
is interrupted or weakened, and there is another strong
station nearby on the FM band, your radio may tune in
the second station until the original signal can be picked
up again.
AM
Fading ± AM broadcasts are reflected by the upper
atmosphere ± especially at night. These reflected
signals can interfere with those received directly from
the radio station, causing the radio station to sound
alternately strong and weak.
Station interference ± When a reflected signal and a
signal received directly from a radio station are very
nearly the same frequency, they can interfere with each
other, making it difficult to hear the broadcast.
Static ± AM is easily affected by external sources of
electrical noise, such as high tension power lines,
lightening, or electrical motors. This results in static.
Caring for your cassette player and tapes
For the best performance for your cassette player and
tapes:
Clean the tape head and other parts regularly.
A dirty tape head or tape path can decrease sound
quality and tangle your cassette tapes. The easiest
way to clean them is by using a cleaning tape. (A wet
type is recommended.) Use high±quality cassettes:
Low±quality cassette tapes can cause many
problems, including poor sound, inconsistent playing
speed, and constant auto±reversing. They can also
get stuck or tangled in the cassette player.
Do not use a cassette if it has been damaged or
tangled or if its label is peeling off.
Do not leave a cassette in the player if you are not
listening to it, especially if it is hot outside.
Store cassettes in their cases and out of direct
sunlight.
Avoid using cassettes with a total playing time longer
than 100 minutes (50 minutes per side). The tape
used in these cassette is thin and could get stuck or
tangled in the cassette player.
Page 285 of 504
AUDIO
268Caring for your compact disc player and discs
20L037
Use only compact discs labeled as shown. CD±R
(CD±Recordable), CD±RW (CD±Re±writable) and
personal computer use CD±ROMs may not be
playable on your compact disc player.
Your compact disc player is intended for use with 12
cm (4.7 in.) discs only.
Extremely high temperature can keep your compact
disc player from working. On hot days, use air
conditioning to cool the vehicle interior before you
listen to a disc.
Bumpy roads or other vibrations may make your
compact disc player skip.
If moisture gets into your compact disc player, you
may not hear any sound even though your compact
disc player appears to be working. Remove the
magazine from the player and wait until it dries.
Page 287 of 504
AUDIO
270Your automatic changer cannot play special shaped or
low±quality compact discs such as those shown here.
Do not use them as the changer could be damaged.
20L038
Correct Wrong
Handle compact discs carefully, especially when you
set them into the magazine. Hold them on the edge
and do not bend them. Avoid getting fingerprints on
them, particularly on the shiny side.
Dirt, scrapes, warping, pin holes, or other disc
damage could cause the player to skip or to repeat a
section of a track. (To see a pin hole, hold the disc up
to the light.)
Page 288 of 504
AUDIO
271
20L039
To clean a compact disc: Wipe it with a soft, lint±free
cloth that has been dampened with water. Wipe in a
straight line from the center to the edge of the disc (not
in a circle). Do not use a conventional record cleaner or
anti±static device.
CAUTION
Compact disc players use an invisible laser beam which
could cause hazardous radiation exposure if directed
outside the unit. Be sure to operate the player correctly.
Page:
< prev 1-8 9-16 17-24