2001 HONDA ACCORD SEDAN lock

Keys and Locks

As required by the FCC: This device complies with Part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly
approved by the party responsible for compliance could void the user's
authority to operate the equipment.
This device complies with Industry

Canada Standard RSS-210.
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must accept any interference that may cause undesired operation of the device. Transmitter Care

Avoid severe shock to the trans- mitter, such as dropping or throwing
it. Also, protect it from extreme hotor cold temperatures.
Clean the transmitter case with a
soft cloth. Do not use strong
cleaners or solvents that could harm
the case. Immersing the transmitter in any liquid will harm the trans-
mitter and cause it to not function
properly.
If you lose a transmitter, you will
need to have the replacement
programmed to your car's system by
your Honda dealer. Any other transmitters you have will also need
to be reprogrammed.

Instruments and Controls

Keys and Locks

Childproof Door Locks
The childproof door locks are designed to prevent children seated
in the rear from accidentally opening
the rear doors. Each rear door has a
lock lever near the edge. With the
lever in the LOCK position, the doorcannot be opened from the inside
regardless of the position of the lock
tab. To open the door, pull the lock
tab up and use the outside door
handle.
Trunk

You can open the trunk in three
ways:
Pull the trunk release handle to
the left of the driver's seat. Use the master key to open the
trunk lock. The valet key does not
work in this lock. Press the trunk release button on
the remote transmitter.
(EX and EX-V6 models only) To close the trunk, press down on
the trunk lid.
See page 190 for cargo loading and
weight limit information. Keep the trunk lid closed at all times whiledriving to avoid damaging the lid,
and to prevent exhaust gas from
getting into the interior. See Carbon Monoxide Hazard on page 49.
Instruments and Controls
LEVER

MASTER KEY

TRUNK RELEASE HANDLE

Keys and Locks

To protect items in the trunk when
you need to give the key to someone
else:

1. Lock the trunk release handle with the master key. Also makesure the trunk pass-through cover
is locked (see page 95).
2. Give the person the valet key. Emergency Trunk Opener

US model only

As a safety feature, your car has a release lever on the trunk latch so
the trunk can be opened from inside. To open the trunk, push the release
lever to the left.
Parents should decide if their
children should be shown how to use
this feature.
For more information about childsafety, see page 19.

Instruments and Controls

MASTER KEY

Keys and Locks
Glove Box

Open the glove box by squeezing the
handle. Close it with a firm push. Lock or unlock the glove box with
the master key.
The glove box light comes on only when the instrument panel lights are
on.

Instruments and Controls
GLOVE BOX

An open glove box can cause
serious injury to your passengerin a crash, even if thepassenger is wearing the seat

belt.

Always keep the glove box
closed while driving.

HomeLink Universal Transmitter

Training the Transmitter Before you can use the HomeLink
Universal Transmitter to operatedevices around your home, it must
"learn" the proper codes. For
example, to train the transmitter to open and close the garage door:
Before you begin — If you just took

delivery of your vehicle and have not
trained any of the buttons in the
HomeLink transmitter before, you should erase any previously learned
codes before training the first button.
To do this, press and hold the two outside buttons on the HomeLink
transmitter for about 20 seconds
until the red light flashes. Release the buttons, then proceed to Step 1.
If you are training the second or
third buttons, go directly to Step 1.
1. Unplug the garage door opener motor from the house current.
2. Hold the end of the garage door opener remote control 2 to 5
inches from the HomeLink
transmitter. Make sure you are
not blocking your view of the red
light in the transmitter. 3. Select the transmitter button you
want to train.
4. Press the button on the remote control and the button on the
transmitter at the same time. Hold down both buttons.
Instruments and Controls

Seat Adjustments

All V-6 models, and the 4-cylinder EX model with leather interior have a
power adjustable driver's seat.
The EX-V6 model also has a power adjustable passenger's seat (See
page 92 ).
The 4-cylinder EX model without leather interior has a power seat
bottom height adjustment. All otherseat adjustments in this model are
manual.

The 4-cylinder DX, LX models have
manual seat adjustments (see next
column).
The front passenger's seat in all
4-cylinder models and the LX-V6

model adjusts manually. Front Seat Adjustments

See pages 12 — 13 for important safety

information and warnings about how to

properly position seats and seat-backs.

Adjust the seat before you start
driving.
To adjust the seat forward and backward, pull up on the lever underthe seat cushion's front edge. Move
the seat to the desired position and
release the lever. Try to move theseat to make sure it is locked in

position.
To change the angle of the seat-back,
pull up on the lever on the outside of
the seat bottom. Move the seat-back
to the desired position and release
the lever. Let the seat-back latch in
the new position.
Instruments and Controls

Seat Adjustments

Folding Rear Seat

The back of the rear seat folds down, giving you direct access to the trunk.
The seat-back can be released from inside the car or inside the trunk.
To fold down the seat-back from inside the car, insert the master key
in the lock on the rear shelf. Turn
the key clockwise, pull down the top of the seat-back, then release the
key.
When storing cargo, you can move

the rear center shoulder belt out of
the way by removing the belt from
the guide.
To release the seat-back from inside
the trunk, pull the release loop under
the trunk panel.
To lock the seat-back upright, push it firmly against the trunk panel. Makesure it is latched in place by pulling
on the top of the seat.

CONTINUED

Instruments and Controls

MASTER KEY

Seat Adjustments

Trunk Pass-through Cover

The pass-through cover can be opened from either side; it folds
forward onto the center armrest. Open the cover by sliding the knob
downward and pushing or pulling on
the cover. To close the cover, swing
it up and push firmly on the top. Make sure it latches properly.
Make sure all items in the trunk and
those extending through the pass-
through are secured. For security, this cover can be
locked and unlocked only with the
master key. To lock the cover, insert
the key and turn it clockwise.
Never drive with this cover open and
the trunk lid open. See Carbon Monoxide Hazard on

page 49.

Instruments and Controls

KNOB
LID