2001 FIAT MAREA ect

Introduction
Performance - Fuel consumption
Marea-Marea Weekend
2000 range ©
OO.o
ENGINE TYPE
16v 16v C.A 20v JTD
Speed km/h (half laden)
(*) For Marea Weekend
46
80
124
173
187
(185)'
46
MAX
187
(185)*
59
94
139
182
208
(206)*
54
Max. clima-
ble gradient
fully laden
Marea 36 32 39
Marea Weekend 33 30 36
Urban
Out-of-town
Marea 11.2 12.2 13.7
Marea Weekend 11.3 12.4 13.8
Marea 6.3 6.7 7.6
Fuel consumption in accor­
dance with directive
1999/100/CE (litres/100 km) Combined
Marea Weekend 6.5 6.7 7.7
Marea 8.1 8.7 9.8
Marea Weekend 8.2 8.8 9.9
CO2 exhaust emissions (g/km)
Marea 192 207 234
Marea Weekend 195 210 237
The fuel consumption figures in accordance with directive 1999/100/CE have been defined during the course of homologation
tests which include:
- An urban cycle which includes a cold start followed by a simulated varied urban cycle.
- A non-urban cycle which includes frequent acceleration in all gears simulating normal out-of-town use of the vehicle.
The speed varies between 0 and 120 km/h.
- The average combined consumption includes 37% urban cycle and 63% non-urban cycle.
The type of route, traffic conditions, driving style, weather conditions, trim level/equipment/accessories, presence of special
equipment and the state of the vehicle in general can lead to different fuel consumption figures from those established
using the above mentioned procedures.
The CO2 exhaust emissions (in g/km) are measured during the average combined cycle.
4 Print n° 506.763/23

Marea-Marea Weekend
2000 range (§)
Introduction
Product characteristics FL Group
OO.o
Name of
product
Description
International designation Application
SELENIA 20K
Synthetic SAE 10W40 multigrade engine oil.
Exceeds specifications ACEA A3-96/CCMC G5 and API
SJ
SELENIA
PERFORMER
Synthetic SAE 5W-30 multigrade engine oil. Exceeds
specifications ACEA A1 and API SJ
Temperatures below
- 20°C
SELENIA
Turbo Diesel
Synthetic SAE 10W40 multigrade engine oil
Exceeds specifications ACEA B3 and API CD
SELENIA
WR DIESEL
Synthetic SAE 5W-40 multigrade engine oil. Exceeds
specifications ACEA B3 and API CF
Temperatures below
- 15°C
TUTELA CAR
ZC 75 SYNTH
SAE 75W-80 EP oil. Satisfies standards MIL-L-2105 D
LEV and API GL 5
Manual gearboxes and
differentials
TUTELA Gl/A «ATF DEXR0N II D LEV» SAE 10W type oil for hydraulic
power assisted steering
Hydraulic power as­
sisted steering
TUTELA GI/2 « ATF DEXRON II D LEV» SAE 10W type oil for auto­
matic transmissions
Automatic
gearboxes
TUTELA MRM2 Water repellant, lithium soap based grease containing
molybdenum disulphide, consistency NLGI = 2 Constant velocity joints
TUTELA TOP 4 Synthetic fluid NHTSA n° 116 D0T4, ISO 4925, SAE
J-1703 and CUNA NC 956-01
Hydraulic brakes and
hydraulically operated
clutches
DP1 Mixture of alcohol, water and surface active agents
CUNA NC 956-11
To be used undiluted
or diluted in windscreen
washer systems
Paraflu11
Anti-freeze for cooling systems with mono-ethylene gly­
col base
CUNA NC 956-16
Cooling circuits
Percentage to be used
50% up to -35°C
Diesel Mix Additive for diesel fuel with protective action for Die­
sel engines
To be mixed with die­
sel fuel (25 cc per 10
litres)
Copyright by Fiat Auto 9

Technical Data
Engine
Marea-Marea Weekend
2000 range @
OO.io
SPECIFICATIONS
Cycle OTTO 4 stroke
^Q\^ Timing gear TOHC
1 Fuel system type Integrated electronic injection - ignition
L—,1 Number of cylinders
Ml • • •
4 5
Vt—•F-jZf Cylinder liner
Is—A \ mm
W (bore)
80.5 82
j^J |q| Stroke mm 78.4 75.65
fifi-9 0> °-ace" cm3
1596 1998
^|*^^ Compression
= 9 ratio
ft
10.50 ±0.15 10.5 ±0.15
kW
r _ (bhp) X Maximum
76
(103)
110
(150)
/ power CEE
/ .. ... • rpm 5750 6500
daNm
(kgm)
Maximum
14.5
(14.8)
18.1
(18.5)
, torque CEE
... \ > rpm 4000 3750
10 Print n° 506.763/23

Technical Data
Engine: lubrication
OO.io
Marea- Marea Weekend
2000 range ©
LUBRICATION - DESCRIPTION LUBRICATION - DESCRIPTION Values in mm
Engine lubrication circuit forced circulation, via geared pump
with cartridge oil filter in series
Oil pump: type gears
Pump operated through auxiliary shaft
Oil pressure relief valve incorporated in the oil pump
Full flow filter cartridge
Low oil pressure transmitter electrical
IlimBi between the edge of the gears
^^^•••F and the pump casing
JjOj^^^U between the upper edge of the
^^*^^B§ gears and the pump cover
Clearance between the bearing and the driven gear
Clearance between the drive gear shaft and the
housing in the pump casing
Oi p between drive gear
* * and driven gear
0 © J±
Operating pressure at a temperature of 100°C
when idling > 1 bar
at 4000 rpm > 4.5 bar
Pi 9.0-9.8 daN
31
9 1 Hi I H? P2 6.92-7.21 daN
H2 21
24 Print n° 506.763/23

Marea-Marea Weekend
2000 range ©
Technical Data
Engine: lubrication
OO.io
LUBRICATION - DESCRIPTION Values in mm
Engine lubrication circuit forced circulation, via geared pump
with cartridge oil filter in series
Oil pump: type geared located in the
crankshaft front cover
Pump operated by chain driven by crankshaft
Oil pressure relief valve incorported in crankshaft front cover
Full flow filter cartridge
Low oil pressure transmitter electrical
llOmH between the edge of the gears
^^^•••F and the pump casing
(EQi^^^U between upper edge of
^^^^BBf gears and pump cover
Oi 0 between drive gear
-*r-H- and driven gear
© © J:
Operating pressure at a temperature of 100°C
when idling 1 bar
at 4000 rpm > 4 bar
11.73-12.51
2 J*
Hi
Oil pressure relief valve spring
35
Copyright by Fiat Auto 25

Technical Data Marea-Marea Weekend
Engine: cooling system • fuel system 2000 range (§)
OO.io
COOLING
Cooling circuit coolant circulation via centrifugal pump, radiator
and two speed fan operated by engine control unit
Water pump operated via belt
fl (^+\ STA9E 1 90°H-94°C 96°+97T
^ Engagement vj^/ ?
of fan stage Z 95°+99°C (•) 101+102°C
\f Operated by v .
control unit (s\oo\ 9 85V89X 93°-H94T
• v y
v—' stage 2 90°+94°C (•) 98+99T
opening starts 81° - 85°C
Engine coolant
thermostat rnax opening 99+103°C 101DC+105'C
valve travel 9.5 mm
Fitting clearance between impeller p
vanes and pump casing j |< 0.3:1.1 mm 0.4 : 0.95 mm
Pressure for checking system water tightness 0.98 bar
Pressure for checking exhaust valve on expansion
tank cap 0.98 bar
(•) Versions with climate control
FUEL FEED SYSTEM
Make
Electronic integrated
injection-ignition
MPI - I.A.W.
Weber-Marelli
Electronic integrated
injection-ignition
MPI - BOSCH Motronic
Pump electric immersed in the tank
Output > 120 l/h
Fuel pressure regulator setting 3 bar
26 Print n° 506.763/23

Marea-Marea Weekend Technical Data
2000 range (j§) Engine: fuel system - special tools
OO.io
INTEGRATED ELECTRONIC INJECTION/IGNITION SYSTEM
COMPONENTS
Electronic control unit
Manual gearbox I.A.W. 4EF. B3
Electronic control unit
Automatic transmission I.A.W. 4EF. L1
Air pressure sensor M. Marelli TPRT 05
Fuel vapour solenoid valve M. Marelli EC2
Throttle case M. Marelli 46 SX F2
Idle adjustment actuator M. Marelli IB 02
Injector M. Marelli IWP 109
Fuel pressure regulator MARWALL RPM 84
Coolant temperature sender unit SYLEA 402.386.01
Top Dead Centre and rpm sensor M. Marelli CVM 02
Throttle position sensor (potentiometer) M. Marelli IPF 2C
Detonation sensor NGK KNE 11
Electric fuel pump (*) MARWALL ESS 291
Lambda sensor upstream of catalyzer NTK OZA 534 A1
Lambda sensor downstream of catalyzer NTK OZA 532 A1
Fuel filter MARWALL FA 5325 IN
Timing sensor SYLEA SFA 200
Ignition coil Champion BAE 920A/
BERU 0.040.100.029
SPECIAL TOOLS
(*) Use tool 1870736000 for removing-refitting the fuel pump retaining ring nut
Copyright by Fiat Auto 27

Technical Data Marea- Marea Weekend
Engine: fuel system - special tools 2000 arnge ©)
OO.io
INTEGRATED ELECTRONIC INJECTION/IGNITION SYSTEM COMPO­
NENTS
Injection/ignition system electronic control unit Bosch ME31F001
Motorized throttle body Bosch 0.250.003.052
Injector Bosch 0.280.155.770
Electric fuel pump (*) Bosch 0.580.313.011
Air flow meter Bosch 0.281.002.199
Engine coolant temperature sensor ELTH 2690350 - SYLEA
402.183.01
Lambda sensor (one upstream and one downstream of the catalyzer) Bosch LS F4
0.258.006.193
Fuel vapour solenoid valve Bosch 0.280.142.340
Detonation sensor Bosch 0.261.231.131
Hall effect injection timing sensor Bosch 0.232.101.036
Top Dead Centre and rpm sensor Bosch 0.261.210.160
Ignition coil Bosch 0.221.504.014
SPECIAL TOOLS
(*) Use tool 1870736000 for removing-refitting the fuel pump retaining ring nut
28 Print n° 506.763/23