– Do not leave tapes in direct sunlight or expose
them to excessive heat or moisture.
– Put cassettes back into their boxes after use.
– Dirt on the player head from tapes can, in time,
reduce treble during playback. We recommend you
clean the head periodically with a specific head clean-
er tape (non abrasive).
– Ideally, use C–60 tapes. Do not use tapes longer
than C–90 to ensure constant, optimal playback.
Moreover, longer tapes are very thin and can easily
break.– Avoid using cassettes with slack tape, especially
C–90 tapes. The tape could come out of the cassette
and block the mechanism. However, if the player de-
tect slack tape or similar problems, the cassette will
be ejected automatically.
– Do not lubricate cassette mechanism.
– Do not touch the player head with magnetic or
hard objects.
CD
If you are using a CD player, remember that dirt or
marks on the CD can cause skipping or bad sound
quality in playback. The same will occur if the CD is
bent.
For optimal CD playback:
5Cyan GialloMagenta Nero603.47.453
5
6Cyan GialloMagenta Nero603.47.453
6
– Do not leave discs in direct sunlight or expose
them to high temperatures or moisture for a long
time to avoid bending them.
– Do not stick labels or write on the recorded side
of a CD.
USEFUL ADVICE
– Only use CD carrying the following trademark:
– Clean each CD carefully. Remove fingerprints
and dust with a soft cloth. Hold the CD from its
edge and clean from the centre outwards.
– Never use chemical products (e.g. sprays, anti-
static products or thinners). These products could
damage the CD surface.
– After use, put the CD’s back in their cases after
use to avoid marking or scratching the discs. This
would cause skips in playback.
