2001 FIAT BARCHETTA ECO mode

10Cyan GialloMagenta Nero603.47.453
10
OPERATION
MAIN OPERATIONS
IMPORTANTTurn the volume down before
turning the sound system off. Sound quality will be
perfect and the sound system will not be damaged
when you turn it back on.
Turning the sound system on and adjusting the vol-
ume
1.Press the (POWER) button [2] to turn the
sound system on. Press the (POWER) button for at
least one second to turn the sound system off.
2. Press the function button (FUNC)[2] to select
Radio, Tape and CD functions cyclically as follows:
Radio➞Tape ➞CD ➞Radio
The message “NO CASS”will appear if there is
no tape in the player.The message “NO DISC”will appear if there is
no CD in the magazine or if the CD player is not
connected.
3.Press the up/down buttons [3] to adjust the vol-
ume.
N: to turn volume up
O: to turn volume down
Audio adjustments
1. Press the audio mode (A-M) [1] to select the
mode required. The mode changes each time the
(A-M) button is pressed as follows:
BASS / TREB(bass / treble) ➞BAL / FAD(bal-
ance / fader) ➞previous mode.
2. Adjust bass and treble with the left/right and the
up / down buttons [18], [3].

G: Decrease bass
H: Increase bass

11Cyan GialloMagenta Nero603.47.453
11
Mute
This function will automatically turn the volume
down to zero.
Press the MUTE[14]. The sound will disappear
and the message “MUTE” will appear on the dis-
play. Press the MUTEbutton again to turn the func-
tion off.
This function is operating in “cassette” or “com-
pact disc” modes only.
RADIO FUNCTIONS
Listening to the radio
1. Press the function button (FUNC) [2] to select
radio mode.
Press the BANDbutton [17] to select the recep-
tion band FM (FM1, FM2, FM3) ot AM (MW /
LW). The band will change each time the button is
pressed as follows:
N: Increase treble
O: Decrease treble
3.Adjust balance and fader with the left/right and
up / down buttons [18], [3].

G: Increase left speaker sound
H: Increase right speaker sound

N: Increase front speaker sound
O: Increase rear speaker sound
Loudness
Keep the loudness button (LOUD)[1] pressed
for longer than 2 seconds to activate/deactivate this
function. The message“LD”will appear on the dis-
play when the function is on.

16Cyan GialloMagenta Nero603.47.453
OPERATION
16
To start the function, press theTAbutton [9]. If
the initial station is not enabled to provide traffic an-
nouncements (the message “TP”will not appear on
the display), the radio will automatically tune to the
closest station broadcasting traffic announcements
and the message “TA” will appear on the display.
Note: If no RDS TA stations can be received, the
system will continue the search indeterminately. To
stop the search, press the TAbutton [9] again.
If, on the other hand, a station has been found, the
system will turn to TAstand-by until the traffic an-
nouncement starts. In this case, the message TRA
INFOfollowed by PS(Programme Service name)
will appear on the display.
The playback of a CD or tape will be interrupted
to allow to listen to traffic announcements broadcast
by an RDS TA station.Press the TAbutton [9] during traffic announce-
ment broadcasting to stop listening to the an-
nouncement and the system will return to TA
stand-by mode.
To memorise stations with the TPfunction on,
follow the storage procedure described in the para-
graph “Manual station storage”.
Alternatively to manual storage, press the AS but-
ton [10] for 2 seconds or more to automatically
store the stations with the TP function on (see “Au-
tomatic storage”).
To turn the function off, press the TAbutton [9]
again.
EON (Enhanced Other Network) function
Circuits grouping stations enabled to broadcast
traffic announcements (NEWS) are available in
some countries.

18Cyan GialloMagenta Nero603.47.453
OPERATION
18
Pre-setting TA, emergency (ALARM) and
PTY-NEWS functions volume
You can adjust the volume for TA, ALARMand
PTY-NEWSfunctions as required.
During TA, ALARMand PTY-NEWS broad-
casts, the sound system volume will automatically
adapt to the pre-set volume level.
The factory setting is TA VOL 9.
Volume will not change if it is set to a higher level
duringTA, ALARM and PTY-NEWSbroadcasts.
If it is set to a level, it will change to the volume set
with the following procedure:
1. Press theTA button [9] for more than 2 sec-
onds. If the volume is not adjusted within the follow-
ing 7 seconds, the display will automatically return to
radio mode.
2.To adjust the volume, use the up/down buttons
[3].3. Press the TAbutton [9] to end the procedure.
TAPE PLAYER OPERATION
Insert a tape in the desk facing rightwards. Play-
back will start automatically.
Correct equalisation of the player will be per-
formed according to the type of tape used (e.g.
chromium or metal tapes).
At the end of the tape, the other side of the tape
will be played automatically.
To change tape side before the end, press the
PROG button [17].

19Cyan GialloMagenta Nero603.47.453
19
H: Press this button to fast forward the tape
G:Press this button to rewind the tape.
The radio will be turned on while the tape is being
fast forwarded/rewound.
Last/next track search (Auto Program
Control function)
Press the left/right button [18] twice.
H: Press this button twice to go to the beginning
of the next track
G: Press this button twice to return to the begin-
ning of the track being played. Press the button again
to go to the beginning of the last track.
During automatic search, the radio will be played. Playing an inserted tape
Press the FUNCbutton [2] to select tape mode.
Playback will start automatically.
Pause function
Press the play / pause button [14] to stop playback
temporarily. Press it again to start playback again.
Ejecting a tape
Press the eject button [5], to eject the tape auto-
matically.
The system will switch to radio mode automatical-
ly 4 seconds after pressing the eject button.
Fast forward/reverse
Press the left / right button [18].

20Cyan GialloMagenta Nero603.47.453
OPERATION
20
Scanning tape tracks (forward)
Press the SCN button [6] to play the first 10 sec-
onds of each track on the tape. The message
“SCAN” will appear on the display. Press theSCN
button [6] again to stop the scan.
Repeat track
Press the RPTbutton [8] to play the last track
again. The message “RPT”will appear on the dis-
play. To quit this mode, press the RPTbutton again
[8].
Dolby B noise reduction function
Press the Dolby B NR[15] to start the function.
The message“B NR”will appear on the display.
Press the button again to turn the function off.Skip blank tape function
This function will skip blank tape sections lasting
for longer than 12 seconds and automatically start
playing the next recorded section.
To turn the function on, press the BLSbutton
[13] until the message“BLS”appears on the dis-
play. Press the button again to turn the function off.
Note:
In some cases, the following functions may not
work correctly:
– next/last track search
– track scan
– repeat track
– skip blank tape.

24Cyan GialloMagenta Nero603.47.453
24
Fast forward/fast backward
Keep the left/right button [18] pressed.
G: fast backward
H: fast forward
Hold the button pressed for longer than 1 second
to advance at a speed equal to 3 times normal speed.
Hold the button pressed for longer than 3 seconds
to advance at a speed equal to 30 times normal
speed.
Scan tracks on selected CD
Press the SCNbutton [6] to play the first 10 sec-
onds of each track on the selected CD. The message
“SCAN”will appear on the display. Press the SCN
button [6] again to stop the scan.The scan will start from the next track with re-
spect to the one being played.
Scan tracks on all CD’s
Press the SCNbutton [6] for more than 2 sec-
onds to play the first 10 seconds of all the discs in
the player. The messages “DISC”and “SCN”will
appear on the display. Press theSCNbutton [6]
again to stop the scan.
The scan will start from the next track with re-
spect to the one being played.
Repeat track
Press the RPTbutton [8] to play the track sever-
al times. The message “RPT”will appear on the dis-
play. Press theRPTbutton[8] again to end this
mode.
OPERATION