59n
IndexDataTechnologyRepairsCar careControlsOverview
Transporting children safelyLift the head restraint and pass the
tether strap between the headrest and
the seat back.
Adjust the tether strap according to the
child restraint manufacturer's instruc-
tions.
Before installing any child restraint
device or child seat, please read
the following:
Never install a rear-facing child restraint
system in the front passenger seat of
this vehicle.
Your vehicle is equipped with an airbag
supplemental restraint system for the
front passenger. Because the backrest
on any rear-facing child restraint
system (of the kind designed for infants
under 1 year and 20 - 30 lbs/9 - 14 kg)
would be within the airbag's deploy-
ment range, you should never mount
such a device in the front passenger
seat, as the impact of the airbag against
the child restraint's backrest could lead
to serious or fatal injuries.
If it is necessary for a child (not an
infant) to ride in the front seat, certain
precautions should be taken. First,
move the passenger seat as far away
from the dashboard as possible. This
important precaution is intended to
maximize the distance between the
airbag and the child. Older children
should be tightly secured with the
safety belt.
Younger children should be secured in
an appropriate forward-facing child
restraint system that has first been
properly secured with a safety belt.
Never install a rear-facing child restraint
system in the front passenger seat.
We strongly urge you to carefully read
and comply with the instructions for
installation and use provided by the
child restraint's manufacturer when-
ever you use such a device.
Always ensure that all occupants (of all
ages) remain properly and securely
restrained at all times.c
All rear seating positions in your vehicle
meet the recommendations of SAE
J1819, an industry recommended stan-
dard for securing child restraint
systems in motor vehicles.
LATCH attachment for child seatThe brackets for the LATCH child
restraint system are not visible from the
outside and are located at the points
marked with the arrows.
Carefully press the brackets through
the seam between backrest and seat
upholstery at the locations indicated.
To mount the LATCH child
restraint system, please follow the
manufacturer's operating and safety
precautions.c
Leave the rear safety belts in the
holders, if they are not needed, to
avoid unwanted movement from the
safety belts at high speeds.c
