2001 BMW 5 SERIES fuse

EN/5
Retrofit/Installation kit No. 65 90 0 028 873 84 64 25,805 (others see cover sheet)
Installation Instructions no. 01 29 0 029 541 01 29 0 029 544 Issue date: 04.2001
3. Parts list
0
A Basic wiring harness
B Power supply wiring harness (E39/2 cars only)
1 Insulation-piercing connector (2-way)
2 5A fuse
3 Cable tie (15x)
4 FME connector
5 Template for microphone holder for E39 and E39/2 cars without a sunroof
6 Black microphone cover (only for cars without a sunroof)*
7 Black frame for hands-free kit (only for cars without a sunroof)*
8 Sub-frame for hands-free kit (only for cars without a sunroof)*
9 Front black roof liner trim panel (only for cars with a sunroof)*
10 Black microphone cover (only for cars with a sunroof)*
11 Hexagonal screw with collar
12 Washer, diameter 6.3 mm
13 Nut with collar (x2)
Parts marked with an asterisk (*) are supplied with the retrofit kit in black and may be ordered
separately in other trim colours using the electronic parts catalogue (EPC).
5A
E 39
2 A
365784
9101312111
B
F 39 0962 B

EN/7
Retrofit/Installation kit No. 65 90 0 028 873 84 64 25,805 (others see cover sheet)
Installation Instructions no. 01 29 0 029 541 01 29 0 029 544 Issue date: 04.2001
4. Connection overview
Item DescriptionCable
colourConnection location in the car
A Basic wiring harness
-----
A1
Coaxial socket casing FME - To coaxial plug casing FME on the required load holder
with the hands-free kit or to the required adapter
A2
Black 12-pin plug connector -
Cars without an on-board monitor radio only:
To radio connection plug (after disconnecting the black
12-pin plug casing

X13598

from the radio connection plug)
Cars with an on-board monitor radio only:
Tie back (no longer required)
A3
Socket contact
Signal: Mutewhite/brown
Cars without an on-board monitor radio and without
an existing mute cable on the radio connection plug
only:
To radio connection plug
PIN10
, in the 8-pin plug casing
X18126
Cars without an on-board monitor radio and with an
existing mute cable on the radio connection plug
only:
Cut off, connect to the supply cable of the radio connection
plug

PIN10

, white/brown cable, in the 8-pin plug casing

X18126

using a 2-way insulation-piercing connector (1)

Cars with an on-board monitor radio only:
Tie back (no longer required)
A4
Black 18-pin socket casing
---To the adapter cable required for the hands-free kit,
behind the rear module holder
A5
Black 3-pin socket casing
---To the microphone required for the hands-free kit, in the
headlining
A6
Black 3-pin socket casing
---To cable compensator in the boot on the left if the car is
fitted with a cable compensator (if not, insulate and tie back)

A7
Coaxial socket casing FME
---
To the coaxial plug casing FME on the FME connector (4)
in the boot on the left (connection for telephone aerial); if
you are upgrading the car with a cable compensator, to
the cable compensator or to the required adapter

A8
Floating fuse
Signal: Terminal 30
red To the standard wiring harness near the left tail light
A9
Black 12-pin plug connector
---
Cars without an on-board monitor radio only:
Tie back (no longer required)
Cars with an on-board monitor radio only:
To radio connection plug (after disconnecting the black
12-pin plug casing
X13598
from the radio connection
plug)
A10
Socket contact
Signal: Mute
white/brown
Cars without an on-board monitor radio only:
Tie back (no longer required)
Cars with an on-board monitor radio and without an
existing mute cable on the radio connection plug
only:
To radio connection plug
PIN10
, in the 8-pin plug casing
X18126
Cars with an on-board monitor radio and with an
existing mute cable on the radio connection plug
only:
Cut off, connect to the supply cable of the on-board
monitor radio connection plug
PIN10
, white/brown
cable, in the 8-pin plug casing
X18126
using a 2-way
insulation-piercing connector (1)
A11
Cable eyelet, 6 mm in diameter
Signal: Terminal 31
brown in E39 cars to the earth post
X10305
in E39/2 cars to the earth post
X13016

EN/20Retrofit/Installation kit No. 65 90 0 028 873 84 64 25,805 (others see cover sheet)
Installation Instructions no. 01 29 0 029 541 01 29 0 029 544 Issue date: 04.2001
9. To install the basic wiring harness A (E39 cars only)
0Insert the hexagonal screw with collar (11) from the
rear into the hole (20) and secure it with a nut M6
(13).
If you fit the earth connection cable later, ensure
that you fit the washer (12) first and then branch
A11.
Then secure branch A11 (the cable outlet on the
terminal lug must point downwards) with the
second nut M6 (13).
After securing the parts, treat all of them with
the anti-corrosion measures set out in the
BMW standard.
"
0
The figure shows the final installation position
of the earth connection cable.
"
The cable loom (20) must point downwards.
0Applies to all E39 cars
Remove the left tail light.
Mark the drilling position (20) with a centre punch.
The figure shows the left lamp holder, on cars
without a lamp holder proceed in exactly
the same way.
"
Insert the 5A fuse (2) into the fuse holder A8.
Secure the fuse holder A8 to the wiring harness
near the left tail light with a cable tie (3).
F 39 0993 B
20
13
13 12 11
A11
20
F 39 0994 B
A83 2
5A
F 39 0984 B

EN/28Retrofit/Installation kit No. 65 90 0 028 873 84 64 25,805 (others see cover sheet)
Installation Instructions no. 01 29 0 029 541 01 29 0 029 544 Issue date: 04.2001
10. To install the basic wiring harness A and power supply wiring harness B in E39/2 cars
0Applies to all E39/2 cars
Insert the 5A fuse (2) into the fuse holder A8.
Secure the fuse holder A8 to the wiring harness
near the left tail light with a cable tie (3).
0
5A2
A8
3
F 39 1006 B

EN/31Retrofit/Installation kit No. 65 90 0 028 873 84 64 25,805 (others see cover sheet)
Installation Instructions no. 01 29 0 029 541 01 29 0 029 544 Issue date: 04.2001
12. Circuit diagram for the basic wiring harness A in E39 cars
Legend
F1*Floating fuse holder near the left tail light
X001*Socket contact
X002*Black 18-pin plug casing
X003*Socket contact
A1*Console aerial connector
A4*Black 18-pin socket casing
A5*Black 3-pin socket casing; cable compensator
A7*Boot aerial connector
A12*White 12-pin plug casing
A13*White 12-pin socket casing
N9Radio
X13016Cable eyelet, 6 mm in diameter; earth
X13598Black 12-pin plug casing
X181268-pin plug casing
X18507Black 3-pin connection plug; microphone
1)To standard wiring harness
2)To hands-free system wiring harness
The components and X designations marked with an asterisk (*) are only valid for this circuit
diagram.
All the other components and X designations correspond to BMW after-sales circuit diagrams
Colour abbreviations
BL = Blue OR = Orange
BR = Brown OR = Orange
GE = Yellow SW = Black
GN = Green VI = Violet
GR = Grey WS = White

EN/33Retrofit/Installation kit No. 65 90 0 028 873 84 64 25,805 (others see cover sheet)
Installation Instructions no. 01 29 0 029 541 01 29 0 029 544 Issue date: 04.2001
13. Circuit diagram for the basic wiring harness A in E39/2 cars
Legend
F1*Floating fuse holder near the left tail light
X001*Socket contact
X002*Black 18-pin plug casing
X003*Socket contact
A1*Console aerial connector
A4*Black 18-pin socket casing
A5*Black 3-pin socket casing; cable compensator
A7*Boot aerial connector
A12*White 12-pin plug casing
A13*White 12-pin socket casing
N9Radio
X322Black, 12-pin plug connector; audio hi-fi
X13016Cable eyelet, 6 mm in diameter; earth
X13598Black 12-pin plug casing
X181268-pin plug casing
X18507Black 3-pin connection plug; microphone
1)To power supply wiring harness B
2)To hands-free system wiring harness
3)To be tied back on the standard wiring harness
The components and X designations marked with an asterisk (*) are only valid for this circuit
diagram.
All the other components and X designations correspond to BMW after-sales circuit diagrams
Colour abbreviations
BL = Blue OR = Orange
BR = Brown OR = Orange
GE = Yellow SW = Black
GN = Green VI = Violet
GR = Grey WS = White