01-163
Output Diagnostic Test Mode
(DTM) (scan tool function 03)
Note:
There are two different transmissions:
Transmission with hydraulic controls -E17-, on
which the transmission input speed sensor
(inductive sensor) is secured to the underside
of the valve body.
Transmission with hydraulic regulation -E18/2-,
on which the transmission input speed sensor
(camshaft position sensor) is secured behind
the valve body at the transmission housing.
For information on which transmission is
installed, refer to tables from the following Repair
Manual:
Repair Manual, 5 Spd. Automatic
Transmission 01V, Repair Group 00
Output Diagnostic Test Mode (DTM) for
transmission with hydraulic regulation -E17-
page 01
-164
Output Diagnostic Test Mode (DTM) for
transmission with hydraulic regulation -
Pa
ge 1 of 18 Out
put Dia
gnostic Test Mode
(DTM
) (scan tool function 03
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.10
01-176
Output Dia
gnostic Test Mode
(DTM
)
Press control valve -4- for auto. trans. -N218
Indicated on display:
Note: - Pressure Control valve -N218- is activated (clicks) To switch to next
actuator press key.
Electrical malfunctions will be stored in DTC memory, see DTC
table Page 01
-45
Output Dia
gnostic Test Mode
(DTM
)
Press reg. valve -5- for auto trans. -N233
"Pressure Regulating Valve -5- for Automatic Transmission -N233-" could
now be displayed erroneously due to a software error, even though it
does not exist. Disregard this display. Press button to switch to the next
actuator.
Output Dia
gnostic Test Mode
(DTM
)
Voltage supply for solenoid valves
Indicated on display:
Solenoid valves activated in position "P" are activated (click). Press key
to switch to the next actuator.
Can be disregarded.
-
Press key.
Pa
ge 15 of 18 Out
put Dia
gnostic Test Mode
(DTM
) (scan tool function 03
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.10
