Cooling System
7. Remove the two bolts and the
three nuts with a 7/16 in (10 mm)
wrench, then remove the engine
cover.
8. Loosen the bleeder bolt on top of
the engine.
9. Pour Honda All Season
Antifreeze/Coolant Type 2 into the radiator up to the base of the
filler neck. This coolant is a
mixture of 50 percent antifreeze
and 50 percent water. Pre-mixing
is not required.
The cooling system capacity is:
1.61 US gal (6.1 , 1.34 Imp gal)
10.Tighten the bleeder bolt when
coolant comes out in a steady
stream with no bubbles.
CONTINUED
Maintenance
BOLTS
NUTS
BLEEDER BOLT
Specifications
* 1
: Including the coolant in the reserve tank and that remaining in the
engine.
Reserve tank capacity:
0.172 US gal (0.65 l , 0.143 Imp gal)
* 2 : Excluding the oil remaining in the engine.
Technical Information
