Coolin
g Syste m
5. Remove the reserve tank from its holder by pulling it straight up.Drain the coolant, then put the
tank back in its holder. 6. When the coolant stops draining,
tighten the drain plug at the
bottom of the radiator. Put a new
washer on the drain bolt, thenreinstall the drain bolt in the engine block. Tighten it securely.
Tightening torque:
58 Ibf.ft (78 N.m , 8.0 kgf.m)
7. Pou
r Honda All Season
Antifreeze/Coolant Type 2 into the radiator up to the base of the
filler neck. This coolant is amixture of 50 percent antifreeze
and 50 percent water. Pre-mixing
is not required. The cooling system capacity is:
With 5-speed manual transmission:
(SE,
LS,
GS)
1.16 US gal (4.4 , 0.97 Imp gal)
(GS-R, Type-R
)
1.24 US gal (4.7 , 1.03 Imp gal)
With automatic transmission:
1.24 US gal (4.7 , 1.03 Imp gal)
Maintenanc
e
CONTINUED
Fil
l u p
t
o her e
RESERV
E
TAN K CA P
HOLDE R
RESERV
E TAN K
FILLE
R NEC K
Specifications
Technical Informatio n
*
1
: Including the coolant in the reserve tank and that remaining in the
engine.
Reserve tank capacity: 0.16 US gal (0.6 ,0.13 Imp gal)
* 2: SE, LS,GS
* 3: GS-R,Type-R
* 4: Excluding the oil remaining in the engine.
*
1 : SE, LS, GS
* 2: GS-R, Type-R
* 3 : GS-R
* 4: Type-R
*
1 : SE, LS, GS, GS-R
* 2 : Type-R
page191 .
