2001.5 PEUGEOT 106 spare wheel

YOUR 106 AT A GLANCE3
1-Side windows demisting vents
2 -Windscreen demisting vents
3 -Passenger airbag
4 -Adjustable centre vents
5 -Radio cassette player or spare
6 -Headlamp height adjustment
7 -Interior alarm protection disarm button
8 -Lights, fog lamps and horn stalk
9 -Instrument panel lighting rheostat
10 -Steering wheel with AIR BAG
11 -Windscreen wash/wipe stalk
12 -Ignition,ignition lock and engine immobiliser
13 -Electric mirrors switch
14 -Storage compartment 15
-Controls for: ¥Air conditioning or left-hand heated seat
¥ Lighter
¥ Hazard warning lights
¥ Rear screen and mirrors demisting
¥ Air recirculation or right-hand heated seat
16 -Gear lever
17 -Handbrake
18 -Electric window switches
19 -Passenger airbag disarming switch
20 -Ashtray
21 -Glove box
22 -Adjustable side vent
23 -Fuse box
24 -Bonnet opening control
06-05-2002

PEUGEOT MAINTENANCE13
Services Level
Operations Description of operations for 1st service
ABC
Intermediate visit
DRAIN AND REFILL- Engine drain and refill.∀∀∀- Fuel filter bleeding (Diesel).∀∀∀∀- Oil filter.∀∀∀- Fuel filter (Petrol).∀∀REPLACEMENT- Fuel filter element (Diesel).∀∀- Air filter element.∀- Spark plugs (Petrol).∀∀- Engine oil (check + top up).∀∀- Manual gearbox oil (check + top up).∀∀ ∀- Battery (check + top up) if plug is removable.∀∀∀LEVEL- Front/rear windscreen wash (check + top up).∀∀∀∀∀- Coolant (check + top up).∀∀ ∀∀∀- Brake fluid (check + top up).∀∀ ∀∀- Power steering fluid (check + top up according to specification).∀∀ ∀∀- Operation of lights and indicators.∀∀ ∀∀- Condition of glass, headlamp and light lenses and mirrors.∀∀∀- Horn.∀∀∀- Windscreen washer jets.∀∀∀- Condition of wiper blades.∀∀∀- Condition and tension of ancillary drive belts.∀∀∀- Handbrake.∀∀∀- Condition of hydraulic circuits (hoses and covers), check for leaks.∀∀∀CHECK- Condition of rubber boots and gaiters.∀∀ ∀∀- Brake pad wear.∀∀∀ #- Clearances, hubs, rods, ball joints, flexible mountings.∀- Sealing of dampers.∀- Wear of rear linings.∀- Condition and pressure of tyres (including spare wheel).∀∀ ∀∀- Emission control check according to current legislation (Petrol).∀∀ ∀∀- Smoke opacity (Diesel).∀∀ ∀- Pollen filter check (according to specification).∀∀∀ #- Visual check of the whole vehicle by a PEUGEOT dealer.∀∀
ROAD TEST ∀∀∀
∀: All driving conditions #: Arduous conditions
PEUGEOT SERVICING LEVELS A, B AND C
06-05-2002

PRACTICAL INFORMATION80
CHANGING A WHEEL Access to the spare wheel The spare wheel is outside, under the luggage compartment, in a
metal carrier. ÐTake out the wheel-brace 1.
Ð Using the wheel-brace 1, slacken
the spare wheel carrier bolt inside the luggage compartment,under the carpet.
ÐL
ift the carrier to disengage the
hook towards the rear, then lower it.
ÐT ake out the jack storage box 2
located in the spare wheel. Remove the wheel Ð
Use the wheel-brace to remove the wheel trim by pulling at thevalve location.
Ð Loosen the wheel bolts.
Ð
Use the jack storage box to chockthe wheel at the opposite corner tothe wheel being changed.
Ð Position the jack head in the jac-king point nearest to the wheelbeing changed, taking care thatthe entire base of the jack is incontact with the ground.
Ð Raise the jack, remove the wheelbolts and remove the wheel. Fit the spare wheel Ð
Position the wheel, then lightly pre-tighten the bolts using thewheel-brace.
Ð Lower the jack and release it.
ÐT ighten the bolts using the
wheel-brace.
Ð Fit the wheel trim, starting withthe valve location, and press withthe palm of the hand.
Replacing the wheel in the carrier Ð Lift the wheel to aid re-positio-
ning of the carrier.
Ð Do not forget to retighten thespare wheel carrier bolt.
80
3
2
1
06-05-2002

Special procedure for Sport model Positioning the jack ÐClose the jack completely.
Ð Position the jack under the vehicle at the jacking points tilting it by 90¡, so that the jack handle hinge is at the same height as the sill trim, then straighten it.
Ð Check that the jack is in correct contact with the sill.
Replacing the wheel in the carrier Ð Position the jack storage box with the arrow pointing forwards.
PRACTICAL INFORMATION8181
For your safety, always change a wheel:
Ð on level, solid, non-slipperyground,
Ð with the handbrake applied,
Ð
with Þrst or reverse gear engaged,
Ð Chock the vehicle.
Ð Never position yourself undera vehicle which is supportedonly by a jack. Use a ramp.
After changing the wheel Ð Have the wheel bolts and the tyre pressure checked assoon as possible.
Ð Have the damaged tyrerepaired so that it can bereturned to the vehicle assoon as possible.
Ð The Òspace-savingÓ* type ofspare wheel is Þtted with a115/70R 15 tyre and is for
temporary use only. - Pressure: 61 lbf. in 2
(4.2 bars).
- Maximum speed: 50 m.p.h. (80 km/h).
* According to speciÞcation
3
Never place the jack in contact with the sill trim.
06-05-2002

Special features of the alloy wheels* Bolt covers Alloy wheel bolts are covered by chrome trims. Use tool 3to remove the trims before
slackening the bolts.
PRACTICAL INFORMATION82
Anti-theft bolt** If your wheels are Þtted with an anti- theft bolt (one per wheel), thechrome trim and then the plasticcover must be removed, using tool 3,
before it is unscrewed using one ofthe two anti-theft sockets (whichwere given to you on delivery of yourvehicle along with the duplicate keysand the conÞdential card) and thewheel brace 1.
Note: make a careful note of the code
number engraved on the top of theanti-theft socket. This will enable youto obtain a duplicate of the anti-theft
socket from a PEUGEOT dealer.
* According to speciÞcation. ** According to model and destination.
Fitting the spare wheel If your vehicle is Þtted with a steel spare wheel, it is normal when secu-ring it to notice that the bolt washersdo not come into contact with therim. The spare wheel is secured bythe cone-shaped support of eachbolt. Fitting snow tyres If you Þt snow tyres mounted on steel wheels, it is
essentialto use special
bolts available from your PEUGEOT
dealer.
33
06-05-2002

PRACTICAL INFORMATION
Direction indicator bulbs PY21W Access to the bulbs is from inside the wheel arch. Turn the wheels to full lock (to the
left to change the right hand bulb and vice versa). Open the access ßap.T urn the socket 1/4 turn.
Change the bulb. Ensure that the flap is closed
correctly. Side repeater W5W* Pull the rear part of the transparent
cover and detach the assembly. Support the connector and turn the transparent cover 1/4 turn. Change the bulb.
Rear lights Direction indicators
PY21W
Reversing lights P21W
Fog lamp P21W
T ail lights P5W
Brake/tail lights P21/5W
From inside the luggage com- partment: Remove the plastic protector 1.
Remove the air outlet grille 2using
a cross-head screwdriver. Slacken the two wing nuts 3and
release the light block 4.
Pinch the lugs 5to remove the
bulb-holder. Change the bulbs. * According to speciÞcation
84
4
3
1
2
5
06-05-2002

PRACTICAL INFORMATION
Direction indicator bulbs PY21W Access to the bulbs is from inside the wheel arch. Turn the wheels to full lock (to the
left to change the right hand bulb and vice versa). Open the access ßap.T urn the socket 1/4 turn.
Change the bulb. Ensure that the flap is closed
correctly. Side repeater W5W* Pull the rear part of the transparent
cover and detach the assembly. Support the connector and turn the transparent cover 1/4 turn. Change the bulb.
Rear lights Direction indicators
PY21W
Reversing lights P21W
Fog lamp P21W
T ail lights P5W
Brake/tail lights P21/5W
From inside the luggage com- partment: Remove the plastic protector 1.
Remove the air outlet grille 2using
a cross-head screwdriver. Slacken the two wing nuts 3and
release the light block 4.
Pinch the lugs 5to remove the
bulb-holder. Change the bulbs. * According to speciÞcation
84
4
3
1
2
5
06-05-2002