2000 YAMAHA XVS125 maintenance

EAU00009
TABLE OF CONTENTS
GIVE SAFETY THE RIGHT OF WAY ..................1-1
DESCRIPTION ....................................................2-1
Left view .............................................................2-1
Right view ..........................................................2-2
Controls and Instruments ...................................2-3
INSTRUMENT AND CONTROL
FUNCTIONS ........................................................3-1
Main switch/steering lock ...................................3-1
Indicator lights ....................................................3-2
Speedometer unit ..............................................3-2
Anti-theft alarm (optional)...................................3-3
Handlebar switches............................................3-3
Clutch lever ........................................................3-5
Shift pedal ..........................................................3-5
Brake lever .........................................................3-5
Brake pedal ........................................................3-6
Fuel tank cap .....................................................3-6
Fuel ....................................................................3-7
Fuel cock............................................................3-7
Starter (choke) lever ..........................................3-8
Helmet holder.....................................................3-9
Adjusting the shock absorber assemblies..........3-9
Sidestand .........................................................3-10
Ignition circuit cut-off system............................3-10PRE-OPERATION CHECKS ...............................4-1
Pre-operation check list .....................................4-1
OPERATION AND IMPORTANT RIDING
POINTS................................................................5-1
Starting the engine .............................................5-1
Starting a warm engine ......................................5-3
Shifting ...............................................................5-3
Recommended shift points
(for Switzerland only) .......................................5-4
Tips for reducing fuel consumption ....................5-4
Engine break-in ..................................................5-4
Parking ...............................................................5-5
PERIODIC MAINTENANCE AND MINOR
REPAIR................................................................6-1
Owner’s tool kit ..................................................6-1
Periodic maintenance and lubrication chart .......6-2
Removing and installing panels .........................6-5
Checking the spark plugs...................................6-7
Engine oil and oil filter element ..........................6-9
Cleaning the air filter element ..........................6-12
Adjusting the carburetor ...................................6-14
Adjusting the engine idling speed ....................6-14
Adjusting the throttle cable free play ................6-15
Adjusting the valve clearance ..........................6-161
2
3
4
5
6
5JX-9-E0 4/9/0 4:11 AM Page 5

EAU00021
QGIVE SAFETY THE RIGHT OF WAY
1
1-1
Motorcycles are fascinating vehicles, which can give you an unsurpassed feeling of power and free-
dom. However, they also impose certain limits, which you must accept; even the best motorcycle
does not ignore the laws of physics.
Regular care and maintenance are essential for preserving value and operating condition of your
motorcycle. Moreover, what is true for the motorcycle is also true for the rider: good performance
depends on being in good shape. Riding under the influence of medication, drugs and alcohol is, of
course, out of the question. Motorcycle riders – more than car drivers – must always be at their men-
tal and physical best. Under the influence of even small amounts of alcohol, there is a tendency to
take dangerous risks.
Protective clothing is as essential for the motorcycle rider as seat belts are for car drivers and passen-
gers. Always wear a complete motorcycle suit (whether made of leather or tear-resistant synthetic
materials with protectors), sturdy boots, motorcycle gloves and a properly fitting helmet. Optimum pro-
tective wear, however, should not encourage carelessness. Although full-coverage helmets and suits,
in particular, create an illusion of total safety and protection, motorcyclists will always be vulnerable.
Riders who lack critical self-control run the risk of going too fast and are apt to take chances. This is
even more dangerous in wet weather. The good motorcyclist rides safely, predictably and defensively
– avoiding all dangers, including those caused by others.
Enjoy your ride!
5JX-9-E0 4/9/0 4:11 AM Page 7

EAU00462
PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
3
4
5
6
7
8
9
6-1
1
EAU01175
Owner’s tool kit
The owner’s tool kit is located behind
panel A. (See page 6-5 for panel
removal and installation procedures.)
The service information included in
this manual and the tools provided in
the owner’s tool kit are intended to
assist you in the performance of pre-
ventive maintenance and minor
repairs. However, additional tools
such as a torque wrench may be nec-
essary to perform certain mainte-
nance work correctly.
1. Tool kit
EAU00464
Safety is an obligation of the owner.
Periodic inspection, adjustment and
lubrication will keep your vehicle in
the safest and most efficient condi-
tion possible. The most important
points of inspection, adjustment, and
lubrication are explained on the fol-
lowing pages.
The intervals given in the periodic
maintenance and lubrication chart
should be simply considered as a
general guide under normal riding
conditions. However, DEPENDING
ON THE WEATHER, TERRAIN,
GEOGRAPHICAL LOCATION, AND
INDIVIDUAL USE, THE MAINTE-
NANCE INTERVALS MAY NEED TO
BE SHORTENED.
EW000060
w
If you are not familiar with motor-
cycle maintenance work, have a
Yamaha dealer do it for you.
NOTE:
If you do not have the tools or experi-
ence required for a particular job,
have a Yamaha dealer perform it for
you.
EW000063
w
Modifications not approved by
Yamaha may cause loss of perfor-
mance and render the vehicle
unsafe for use. Consult a Yamaha
dealer before attempting any
changes.
5JX-9-E0 4/9/0 4:11 AM Page 29

6-2
PERIODIC MAINTENANCE AND MINOR REPAIR
6
EAU00473
Periodic maintenance and lubrication chart
No. ITEM CHECKS AND MAINTENANCE JOBSInitial
1,000 kmEvery
6,000 kmEvery
12,000 kmAnnual
check
1
*Fuel line¥ Check fuel hoses and vacuum hose for cracks or damage.
¥ Replace if necessary.ÖÖ
2 Spark plugs¥ Check condition.
¥ Clean, regap or replace if necessary.Ö
3
*Valves¥ Check valve clearance.
¥ Adjust if necessary.Ö
4 Air filter element¥ Clean or replace if necessary.Ö
5 Clutch¥ Check operation.
¥ Adjust or replace cable.ÖÖ
6
*Front brake¥ Check operation, fluid level and vehicle for fluid leakage.
(See NOTE on page 6-4.)
¥ Correct accordingly.
¥ Replace brake pads if necessary.ÖÖ Ö
7
*Rear brake¥ Check operation.
¥ Adjust brake pedal freeplay and replace brake shoes if necessary.ÖÖ Ö
8
*Brake hose¥ Check for cracks or damage.
¥ Replace if necessary.ÖÖ
9
*Wheels¥ Check balance, runout, spoke tightness and for damage.
¥ Tighten spokes and rebalance, replace if necessary.Ö
10
*Tires¥ Check tread depth and for damage.
¥ Replace if necessary.
¥ Check air pressure.
¥ Correct accordingly.Ö
11
*Wheel bearings¥ Check bearings for looseness or damage.
¥ Replace if necessary.Ö
12
*Swingarm¥ Check swingarm pivoting point for play.
¥ Correct if necessary.
¥ Lubricate with molybdenum disulfide grease every 24,000 km or 24
months (whichever comes first).Ö
5JX-9-E0 4/9/0 4:11 AM Page 30

PERIODIC MAINTENANCE AND MINOR REPAIR
6
6-3
13 Drive chain¥ Check chain slack.
¥ Adjust if necessary. Make sure that the rear wheel is properly
aligned.
¥ Clean and lubricate.Every 1,000 km and after washing the
motorcycle or riding in the rain
14
*Steering bearings¥ Check bearing play and steering for roughness.
¥ Correct accordingly.
¥ Lubricate with lithium-soap-based grease every 24.000 km or 24
months (whichever comes first)ÖÖ
15
*Chassis fasteners¥ Make sure that all nuts, bolts and screws are properly tightened.
¥ Tighten if necessary.ÖÖ
16 Sidestand¥ Check operation.
¥ Lubricate and repair if necessary.ÖÖ
17
*Sidestand switch¥ Check operation.
¥ Replace if necessary.ÖÖ Ö
18
*Front fork¥ Check operation and for oil leakage.
¥ Correct accordingly.Ö
19
*Rear shock absorber
assemblies¥ Check operation and shock absorbers for oil leakage.
¥ Replace shock absorber assembly if necessary.Ö
20
*Carburetor¥ Check engine idling speed and starter operation.
¥ Adjust if necessary.ÖÖ Ö
21 Engine oil¥ Check oil level and vehicle for oil leakage.
¥ Correct accordingly.
¥ Change. (Warm engine before draining.)ÖÖ Ö
22 Engine oil filter element¥ Replace.ÖÖ
23
*Front and rear brake
switches¥ Check operation.
¥ Correct accordingly.ÖÖ Ö
24
*Moving parts and cables¥ Lubricate if necessary.ÖÖ No. ITEM CHECKS AND MAINTENANCE JOBSInitial
1,000 kmEvery
6,000 kmEvery
12,000 kmAnnual
check
5JX-9-E0 4/9/0 4:11 AM Page 31

PERIODIC MAINTENANCE AND MINOR REPAIR
6
6-4
EAU03206
NOTE:
8The annual checks must be performed every year, except if a 6,000 km or 12,000 km maintenance is performed
instead.
8The air filter needs more frequent service if you are riding in unusually wet or dusty areas.
8Hydraulic brake service
8Regularly check and, if necessary, correct the brake fluid level.
8Every two years replace the internal components of the brake master cylinder and caliper, and change the brake
fluid.
8Replace the brake hoses every four years and if cracked or damaged.
*Since these items require special tools, data and technical skills, have a Yamaha dealer perform the service.
25*Lights, signals and
switches¥ Check operation.
¥ Correct if necessary.
¥ Adjust headlight beam if necessay.ÖÖ Ö No. ITEM CHECKS AND MAINTENANCE JOBSInitial
1,000 kmEvery
6,000 kmEvery
12,000 kmAnnual
check
5JX-9-E0 4/9/0 4:11 AM Page 32

PERIODIC MAINTENANCE AND MINOR REPAIR
6
6-5
1
EAU01122
Removing and installing pan-
els
The panels shown above need to be
removed to perform some of the
maintenance jobs described in this
chapter. Refer to this section each
time a panel needs to be removed
and installed.
1. Panel A
1
1. Panel B
21
EAU03184
Panel A
To remove the panel
1. Slide the lock cover open, insert
the key into the lock, and then
turn it 1/4 turn clockwise.
1. Lock cover
2. Unlock
5JX-9-E0 4/9/0 4:11 AM Page 33

PERIODIC MAINTENANCE AND MINOR REPAIR
6
6-6
1
2. Pull the rear of the panel out with
the key inserted in the lock, and
then slide the panel forward to
release it in the front.To install the panel
1. Secure the front of the panel,
and then push the rear of the
panel in with the key inserted in
the lock.
2. Turn the key counterclockwise to
the original position, remove it,
and then close the lock cover.
EAU03185
Panel B
To remove the panel
1. Remove the bolt.
1. Bolt
5JX-9-E0 4/9/0 4:11 AM Page 34