1
2
3
4
5
6
7
8
9
6-33
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU01749
Replacing the fuses
The fuse boxes are located behind
panel B. (See page 6-6 for panel
removal and installation procedures.)
If a fuse is blown, replace it as fol-
lows.
1. Turn the key to “OFF” and turn
off the electrical circuit in ques-
tion.
1. Fuse box (´2)
11
2. Remove the blown fuse, and
then install a new fuse of the
specified amperage.
1. Main fuse
2. Spare fuse
3. Headlight fuse
4. Ignition fuse
5. Signaling system fuse
6. Carburetor heater fuse
7. Spare fuse (´2)
73564
21
Specified fuses:
Main fuse: 30 A
Ignition fuse: 10 A
Signaling system fuse: 10 A
Headlight fuse: 15 A
Carburetor heater fuse: 10 A
EC000103
cC
Do not use a fuse of a higher
amperage rating than recommend-
ed to avoid causing extensive
damage to the electrical system
and possibly a fire.
3. Turn the key to “ON” and turn on
the electrical circuit in question to
check if the device operates.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
5JX-9-E0 4/9/0 4:11 AM Page 61
8
SPECIFICATIONS
8-4
Battery
Type GT6B-3
Voltage, capacity 12 V, 6 Ah
Headlight typeHalogen bulb
Bulb voltage, wattage ´quantity
Headlight 12 V, 60/55 W ´1
Tail/brake light 12 V, 5/21 W ´1
Front flasher light 12 V, 21 W ´2
Rear flasher light 12 V, 21 W ´2
Auxiliary light 12 V, 4 W ´1
Meter light 12 V, 1.7 W ´1
Neutral indicator light 12 V, 1.7 W ´1
High beam indicator light 12 V, 1.7 W ´1
Turn indicator light 12 V, 1.7 W ´1
Engine indicator light 12 V, 1.7 W ´1
Fuses
Main fuse 30 A
Headlight fuse 15 A
Signaling system fuse 10 A
Ignition fuse 10 A
Carburetor heater fuse 10 A
5JX-9-E0 4/9/0 4:11 AM Page 79
