INSTRUMENT AND CONTROL FUNCTIONS
3-13
3
EAU01713
Rear shock absorber
adjustmentThis shock absorber is located under
the rider seat. This shock absorber is
equipped with a spring preload adjust-
ing ring. Adjust spring preload as fol-
lows.
1. Remove the rider seat. (See page
3-10 for removal and installation
procedures.)2. Remove each quick fastener by
pushing the center in with a screw-
driver, then pulling the fastener
out.3. Pull the ignitor unit panel outward
to the right.
1. Quick fastener (´ 3)
1. Ignitor unit panel
E_5el_Functions.fm Page 13 Monday, May 1, 2000 9:38 AM
