2000 YAMAHA XT600E ABS

EAU00026
DESCRIPTION
12
3
4
5
6
7
8
9
2-1
1.Headlight (page 6-29)
2.Fuel cock (page 3-7)
3.Battery (page 6-28)
4.Tool kit (page 6-1)
5.Helmet holder (page 3-9)6.Rear shock absorber spring preload
adjusting nut (page 3-10)
7.Fuse (page 6-28)
8.Starter (choke) (page 3-8)
9.Shift pedal (page 3-5)
1
2
3
45
6
7 8 9
Left view
4PT-9-E6 (ENG) 1~5 12/27/00 1:28 PM Page 10

INSTRUMENT AND CONTROL FUNCTIONSMain switch/steering lock.......................................................................3-1
Indicator lights.......................................................................................3-2
Speedometer.........................................................................................3-2
Tachometer...........................................................................................3-3
Handlebar switches...............................................................................3-3
Clutch lever............................................................................................3-4
Shift pedal..............................................................................................3-5
Front brake lever...................................................................................3-5
Rear brake pedal...................................................................................3-5
Fuel tank cap.........................................................................................3-6
Fuel........................................................................................................3-6
Fuel cock...............................................................................................3-7
Starter (choke) Ò
1Ó...............................................................................3-8
Seat.......................................................................................................3-9
Helmet holder........................................................................................3-9
Rear shock absorber adjustment.........................................................3-10
Sidestand.............................................................................................3-11
Sidestand/clutch switch operation check.............................................3-12
3
4PT-9-E6 (ENG) 1~5 12/27/00 1:28 PM Page 13

3-10
INSTRUMENT AND CONTROL FUNCTIONS
1
23
4
5
6
7
8
9 Shortening spring set length
increases spring preload, length-
ening spring set length decreas-
es spring preload.
EC000015
cCNever attempt to turn an adjuster
beyond the maximum or minimum
setting.3.Tighten the locknut to the speci-
fied torque.
EC000018
cCAlways tighten the locknut against
the spring adjusting nut and tight-
en the locknut to the specified
torque.
1
1.Measuring distance ÒAÓ
Spring preload:
Minimum (soft):
Distance ÒAÓ = 248.5 mm
Standard:
Distance ÒAÓ = 243 mm
Maximum (hard):
Distance ÒAÓ = 237.5 mm
Tightening torque:
Locknut:
42 Nm (4.2 m
0kg)
a
b
1 2
EAU01650
Rear shock absorber
adjustmentThis shock absorber is equipped with
a spring preload adjuster. Adjust
spring preload as follows.
1.Loosen the locknut.
2.Turn the adjusting nut in direc-
tion ato increase spring preload
and in direction bto decrease
spring preload. The spring pre-
load is determined by the spring
set length.1.Locknut
2.Adjusting nut
4PT-9-E6 (ENG) 1~5 12/27/00 1:28 PM Page 23

3-11
INSTRUMENT AND CONTROL FUNCTIONS
1
23
4
5
6
7
8
9
EAU00315
wThis shock absorber contains
highly pressurized nitrogen gas.
Read and understand the following
information before handling the
shock absorber. The manufacturer
cannot be held responsible for
property damage or personal
injury that may result from improp-
er handling.8 8
Do not tamper with or attempt
to open the cylinder assembly.
8 8
Do not subject the shock
absorber to an open flame or
other high heat source. This
may cause the unit to explode
due to excessive gas pres-
sure.
8 8
Do not deform or damage the
cylinder in any way. Cylinder
damage will result in poor
damping performance.
8 8
Take your shock absorber to a
Yamaha dealer for any service.
EAU00330
SidestandThis model is equipped with an igni-
tion circuit cut-off system. The motor-
cycle must not be ridden when the
sidestand is down. The sidestand is
located on the left side of the frame.
(Refer to page 5-1 for an explanation
of this system.)
EW000044
wThis motorcycle must not be oper-
ated with the sidestand in the
down position. If the stand is not
properly retracted, it could contact
the ground and distract the opera-
tor, resulting in a possible loss of
control. Yamaha has designed into
this motorcycle a lockout system
to assist the operator in fulfilling
the responsibility of retracting the
sidestand. Please check carefully
the operating instructions listed
below and if there is any indication
of a malfunction, return the motor-
cycle to a Yamaha dealer immedi-
ately for repair.
4PT-9-E6 (ENG) 1~5 12/27/00 1:28 PM Page 24

6-4
PERIODIC MAINTENANCE AND MINOR REPAIR
6
9
*Wheels¥Check runout, spoke tightness and for damage.
¥Tighten spokes if necessary.ÖÖÖÖ
10*Tires¥Check tread depth and for damage.
¥Replace if necessary.
¥Check air pressure.
¥Correct if necessary.ÖÖÖÖ
11*Wheel bearings¥Check bearing for looseness or damage.ÖÖÖÖ
12*Swingarm¥Check operation and for excessive play.ÖÖÖÖ
13Drive chain¥Check chain slack.
¥Make sure that the rear wheel is properly aligned.
¥Clean and lubricate.Every 500 km and after washing
the motorcycle or riding in the rain.
14*Steering bearings¥Check bearing play and steering for roughness.ÖÖÖÖÖ
¥Lubricate with lithium-soap-based grease.Every 20,000 km
15*Chassis fasteners¥Make sure that all nuts, bolts and screws are properly tightened.ÖÖÖÖÖ
16Sidestand¥Check operation.
¥Lubricate.ÖÖÖÖÖ
17*Sidestand switch¥Check operation.ÖÖÖÖÖÖ
18*Front fork¥Check operation and for oil leakage.ÖÖÖÖ
19*Shock absorber
assembly¥Check operation and shock absorber for oil leakage.ÖÖÖÖ NO.ITEMCHECK OR MAINTENANCE JOBODOMETER READING (´ 1,000 km)
ANNUAL
CHECK
110203040
4PT-9-E6 (ENG) 6 12/27/00 1:29 PM Page 5

6-17
PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
3
4
56
7
8
9
EAU00685
WheelsTo ensure maximum performance,
long service, and safe operation, note
the following:
8Always inspect the wheels
before a ride. Check for cracks,
bends or warpage of the wheel.
Be sure the spokes are tight and
undamaged. If any abnormal
condition exists in a wheel, con-
sult a Yamaha dealer. Do not
attempt even small repairs to the
wheel. If a wheel is deformed or
cracked, it must be replaced.
8Tires and wheels should be bal-
anced whenever either one is
changed or replaced. Failure to
have a wheel balanced can
result in poor performance,
adverse handling characteristics,
and shortened tire life.
8Ride at moderate speeds after
changing a tire since the tire sur-
face must first be broken in for it
to develop its optimal character-
istics.
EAU00681
w8 8
Operating the motorcycle with
excessively worn tires
decrease riding stability and
can lead to loss of control.
Have excessively worn tires
replaced by a Yamaha dealer
immediately. Brakes, tires, and
related wheel parts replace-
ment should be left to a
Yamaha Service Technician.
8 8
Patching a punctured tube is
not recommended. If it is
absolutely necessary to do so,
use great care and replace the
tube as soon as possible with
a good quality replacement.
NOTE:
These limits may be different by regu-
lation from country to country. If so,
conform to the limits specified by the
regulations of your own country.
4PT-9-E6 (ENG) 6 12/27/00 1:29 PM Page 18

7-3
EWA00001
wMake sure that there is no oil or
wax on the brakes and tires. If nec-
essary, clean the brake discs and
linings with a regular brake disc
cleaner or acetone, and wash the
tires with warm water and mild
soap. Then, carefully test the
motorcycle for its braking perfor-
mance and cornering behavior.
ECA00013
cC8
8
Apply spray oil and wax spar-
ingly and wipe off any excess.
8 8
Never apply oil or wax on rub-
ber and plastic parts, but treat
them with a suitable care prod-
uct.
8 8
Avoid using abrasive polish-
ing compounds as they wear
away the paint.
MOTORCYCLE CARE AND STORAGE
1
2
3
4
5
67
8
9
NOTE:
Consult a Yamaha dealer for advice
on what products to use.
After cleaning
1.Dry the motorcycle with a
chamois or an absorbing cloth.
2.Immediately dry the drive chain
and lubricate it to prevent it from
rusting.
3.Use a chrome polish to shine
chrome, aluminum and stainless-
steel parts, including the exhaust
system. (Even the thermally
induced discoloring of stainless-
steel exhaust systems can be
removed through polishing.)
4.To prevent corrosion, it is recom-
mended to apply a corrosion pro-
tection spray on all (even
chrome- and nickel-plated) metal
surfaces.
5.Use spray oil as a universal
cleaner to remove any remaining
dirt.
6.Touch up minor paint damage
caused by stones, etc.
7.Wax all painted surfaces.
8.Let the motorcycle dry complete-
ly before storing it or covering it.
4PT-9-E6 (ENG) 7~9 12/27/00 1:30 PM Page 4

SPECIFICATIONS
1
2
3
4
5
6
78
9
Air pressure (cold tire)
up to 90 kg load*
Front150 kPa (1.50 kg/cm
2, 1.50 bar)
Rear150 kPa (1.50 kg/cm2, 1.50 bar)
90 kg load ~ Maximum
load*
Front150 kPa (1.50 kg/cm2, 1.50 bar)
Rear225 kPa (2.25 kg/cm2, 2.25 bar)
Off-road riding
Front125 kPa (1.25 kg/cm2, 1.25 bar)
Rear125 kPa (1.25 kg/cm2, 1.25 bar)
High speed riding
Front150 kPa (1.50 kg/cm2, 1.50 bar)
Rear150 kPa (1.50 kg/cm2, 1.50 bar)
* Load is total weight of cargo, rider, passenger and accessories.
Wheels
Front
TypeSpoke wheel
Size21 ´1.85
Rear
TypeSpoke wheel
Size17 ´MT2.50 Brakes
Front
TypeSingle disc brake
OperationRight hand operation
FluidDOT 3 or DOT 4
Rear
TypeSingle disc brake
OperationRight foot operation
FluidDOT 4
Suspension
Front
TypeTelescopic fork
Rear
TypeSwingarm (new monocross)
Shock absorber
FrontCoil spring/oil damper
RearCoil spring/gas-oil damper
Wheel travel
Front225 mm
Rear200 mm
8-3
4PT-9-E6 (ENG) 7~9 12/27/00 1:30 PM Page 10