2000 SUZUKI GRAND VITARA front door

YH4
GRAND
VITARA
9-18 BODY SERVICE
REAR DOOR ASSEMBLY
REMOVAL / INSTALLATION
Follow procedures for Front Door removal / installation in this sec-
tion.

YH4
GRAND
VITARA
BODY SERVICE 9-25
a. Front bumper
b. 1st mounting
c. Suspension frame
d. Front strut
e. Suspension arm
f. 2nd mounting
g. ù20 zig hole
h. Zig hole
i. 3rd mounting
j. Lower rod
k. Upper rod
l. Lateral rod
m. Rear shock absorber
n. 4th mounting
o. Fuel tank
p. Fuel tank
q. Lower roda ± g : 1315 mm (51.77 in.)
a ± g' : 1534 mm (60.39 in.)
b ± g : 1243 mm (48.94 in.)
b ± g' : 1518 mm (59.76 in.)
c ± g : 1377 mm (54.21 in.)
c ± g' : 1105 mm (43.50 in.)
d ± g' : 1319 mm (51.93 in.)
d ± f : 874 mm (34.41 in.)
e ± g : 525 mm (20.67 in.)
e ± g' : 857 mm (33.74 in.)
f ± g' : 927 mm (36.50 in.)
h ± i : 178 mm (7.01 in.)
h ± j : 133 mm (5.24 in.)
h ± k : 325 mm (12.80 in.)
h ± l : 674 mm (26.54 in.)h ± m : 803 mm (31.61 in.)
h ± n : 1161 mm (45.71 in.)
h ± o : 1184 mm (46.61 in.)
h ± p : 1190 mm (46.85 in.)
i ± q : 999 mm (39.33 in.)
j ± q : 997 mm (39.25 in.)
k ± q : 824 mm (32.44 in.)
l ± q : 1130 mm (44.49 in.)
m ± q : 1258 mm (49.53 in.)
n ± q : 1483 mm (58.39 in.)
o ± q : 1349 mm (53.11 in.)
p ± q : 1334 mm (52.52 in.)
For 4 door model
g' ± q : 1275 mm (50.20 in.)
g ± q : 1534 mm (60.39 in.)
For 2 door model
g' ± q : 995 mm (39.17 in.)
g ± q : 1310 mm (51.57 in.)
UNDER BODY DIMENSIONS

YH4
GRAND
VITARA
Hole to hole distance
ªa ± gº : 276 mm (10.87 in.)
ªa ± kº : 1000 mm (39.37 in.)
ªb ± b'º : 1302 mm (51.26 in.)
ªb ± gº : 730 mm (28.74 in.)
ªc ± c'º : 668 mm (26.30 in.)
ªc ± eº : 414 mm (16.30 in.)
ªc ± gº : 406 mm (15.98 in.)
ªc ± jº : 1029 mm (40.51 in.)
ªc ± kº : 1000 mm (39.37 in.)
ªd ± d'º : 1302 mm (51.26 in.)
ªd ± eº : 189 mm (7.44 in.)
ªd ± c'º : 1016 mm (40.00 in.)
ªd ± gº : 672 mm (26.46 in.)
ªd ± kº : 968 mm (38.11 in.)
ªe ± e'º : 1456 mm (57.32 in.)ªf ± f'º : 1550 mm (61.02 in.)
ªf ± hº : 299 mm (11.77 in.)
ªf ± jº : 811 mm (31.93 in.)
ªg ± kº : 854 mm (33.62 in.)
ªh ± h'º : 1339 mm (52.72 in.)
ªh ± j'º : 1504 mm (59.21 in.)
ªh ± jº : 677 mm (26.65 in.)
ªh ± kº : 927 mm (36.50 in.)
ªi ± i'º : 1344 mm (52.91 in.)
ªi ± jº : 391 mm (15.39 in.)
ªi ± kº : 760 mm (29.92 in.)
ªj ± j'º : 1348 mm (53.07 in.)
ªj ± kº : 676 mm (26.61 in.)
ªl ± jº : 961 mm (37.83 in.)
ªl ± kº : 1018 mm (40.08 in.)
a. Front bumper installation clip hole
b (b'). Front bumper installation hole
c (c'). Headlight installation hole
d (d'). Headlight installation resin nut hole
e (e'). Headlight installation hole
f (f'). Front fender installation hole
g. Center member installation hole
h (h'). Fender installation reference hole
i (i'). Fender installation hole
j (j'). Fender installation reference hole
k. Garnish installation clip hole
l. Mounting installation hole
9-26 BODY SERVICE
BODY DIMENSIONS
4 door model, 2 door model

YH4
GRAND
VITARA
ªh ± h'º : 1521 mm (59.88 in.)
ªh ± oº : 901 mm (35.47 in.)
ªi ± i'º : 1547 mm (60.91 in.)
ªj ± nº : 806 mm (31.73 in.)
ªj ± j'º : 1511 mm (59.49 in.)
ªj ± oº : 649 mm (25.55 in.)
ªk ± k'º : 1126 mm (44.33 in.)
ªk ± oº : 1350 mm (53.15 in.)
ªl ± l'º : 1491 mm (58.70 in.)
ªl ± oº : 1130 mm (44.49 in.)
ªm ± m'º: 939 mm (36.97 in.)
ªm ± oº : 1725 mm (67.91 in.) Hole to hole distance
ªa ± cº : 982 mm (38.66 in.)
ªb ± b'º : 1390 mm (54.72 in.)
ªb ± c'º : 1406 mm (55.35 in.)
ªb ± cº : 755 mm (29.72 in.)
ªc ± c'º : 1012 mm (39.84 in.)
ªd ± d'º : 1545 mm (60.83 in.)
ªd ± nº : 800 mm (31.50 in.)
ªe ± e'º : 1110 mm (43.70 in.)
ªe ± nº : 1036 mm (40.79 in.)
ªf ± f'º : 1511 mm (59.49 in.)
ªf ± nº : 620 mm (34.41 in.)
ªg ± g'º : 1085 mm (42.72 in.)
ªg ± oº : 1099 mm (43.27 in.)
a. Garnish installation clip hole
b (b'). Front end of front windshield lower installation section
c (c'). Front end of front windshield upper installation section
d. Hole in F door lower hinge at rear
e. Trim installation clip hole
f (f'). Scuff installation hole (at rearmost end)
g (g'). Trim installation hole
h (h'). Hole in R door upper hinge in upper part
i (i'). Hole in R door lower hinge in lower part
j (j'). Rear scuff installation hole (at front end)
k (k'). Trim installation hole
l (l'). R door striker lower section installation hole
m (m'). Trim installation hole
n. Installation hole for F seat front inside
o. Installation hole for F seat rear inside
Opposite side of the point shown in figure
BODY SERVICE 9-27
4 door model

YH4
GRAND
VITARA
Hole to hole distance
a ± c : 981 mm (38.62 in.)
b ± b' : 1390 mm (54.72 in.)
b ± c' : 1404 mm (55.28 in.)
c ± c' : 1008 mm (39.69 in.)
e ± e' : 1110 mm (43.70 in.)
e ± i : 1036 mm (40.79 in.)
f ± i : 688 mm (27.09 in.)g ± g' : 1145 mm (45.08 in.)
g ± h : 1017 mm (40.04 in.)
g ± j : 1078 mm (42.44 in.)
h ± h' : 1338 mm (52.68 in.)
h ± j : 1459 mm (57.44 in.)
j ± k : 548 mm (21.57 in.)
l ± l' : 956 mm (37.64 in.)
a. Garnish installation clip hole
b (b'). Front end of front windshield lower installation section
c (c'). Front end of front windshield upper installation section
d. Hole in F door lower hinge at rear
e. Trim installation clip hole
f (f'). Scuff installation hole (at rearmost end)
g (g'). Trim installation hole
h (h').
11 jig hole
i. Installation hole for F seat front inside
j. Installation hole for F seat rear inside
k (k'). F seat belt installation hole
l (l'). Innermost end of side body installation section
9-30 BODY SERVICE
2 door model

YH4
GRAND
VITARA
1. Side body inner panel
2. Rear wheel housing outer rear panel
3. Rear wheel housing panel
4. Rear floor panel
5. Tail lower member
6. Center floor panel
7. Front floor panel
8. Center floor member
9. Side sill inner panel
10. Side outer panelªAº: Apply sealant
ªBº: Brush treatment
9-38 BODY SERVICE
SEALANT APPLICATION AREA
4 door model

YH4
GRAND
VITARA
1. Side body inner panel
2. Rear wheel housing panel
3. Rear floor panel
4. Center floor panel
5. Front floor panel
6. Center floor member
7. Side sill inner panelªAº: Apply sealant
ªBº: Brush treatment
BODY SERVICE 9-47
2 DOOR MODEL

YH4
GRAND
VITARA
ªaº: 30 mm (1.18 in.)
ªbº: 100 mm (3.94 in.)
ªAº: Apply undercoating (PVC, 400
m or more)
ªBº: Additional applying of under coating
ªBº: (for 5 door vehicle without splush guard)
ªCº: Apply PVC chip resistant material (200
m or more)1. Side body outer
2. Side sill inner
3. Main floor
4. Front fender
5. Front wheel housing
6. Frame
7. Dash panel
8. Center floor
9. Rear floor
Vehicle produced in IWATA
VIEW: Z
9-52 BODY SERVICE