Page 374 of 413
Maintenance and service11-35
–
CONTINUED –
HB4001CB
Tires and wheels
WARNING
When replacing a tire, make sure you use only the same size,
circumferences, construction, brand, speed symbol and load in- dex as the original tires listed on the tire placard. Using othersizes, circumferences or construction may result in severe me-
chanical damage to the drivetrain of your vehicle and may affectride, handling, braking, speedometer/odometer calibration, and
clearance between the body and tires. It also may be dangerousand lead to loss of vehicle control. Do not use a combination of radial, belted bias or bias tires
since it may cause dangerous handling characteristics and leadto an accident. Do not let air out of warm tires to adjust pressure. Doing so
will result in low tire pressure.
The tires should b e c hec ked freq uently for p rop er t ire p ressure, wear,
and c uts.
Page 375 of 413
11-36
Tire pressure
For the b est b alanc e b etween fuel ec onomy, tire lif e, rid e c omfort, and
hand ling , tire p ressure should b e maintained in ac c ord anc e with sp ec ifi-
c ations. Chec k the tire p ressure when the tires are c old . Cold means that
the vehic le has b een p arked for three hours or has b een d riven less than
1 mile (1.6 km).
HB0382
The rec ommend ed tire p ressure and sizes are p rovid e d on the tire p lac -
ard , whic h is loc ated und er the d oor latc h on the d river’s sid e.
Tire rotation
Tire wear will vary with eac h wheel. To inc rease th e life of tires and keep
wear uniform, it is b est to rotate them every 7,500 mile (12,500 km).
When rotating tires, rep lac e any unevenly worn or d amag ed tire. After
rotating the tires, ad just tire p ressure and b e sur e to c hec k wheel nut
tig htness.
Page 399 of 413
12
Specifications Specifications12-2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions 12-2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Engine 12-3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical system 12-3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Capacities 12-3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tires 12-4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wheel alignment 12-5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuses and circuits 12-6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuse panel located behind the coin tray 12-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuse panel located in the engine compartment 12-8 . . . . . . . . . . . . . . . . . . .
Bulb chart 12-10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Vehicle identification 12-11
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Page 402 of 413
12-4AT d ifferential g ear oil 1.3 US q t (1.2 liters, 1.1
Imp q t)
Rear d ifferential g ear oil 0.8 US q t (0.8 liter, 0.7 Imp q t)
Power steering g ear fluid 0.7 US q t (0.7 liter, 0.6 Imp q t)
Eng ine c oolant MT 7.2 US q t (6.8 liters, 6.0 Imp q t) AT 7.1 US q t (6.7 liters, 5.9 Imp q t)
Tires Legacy
Typ e Steel b elted rad ial, Tub eless
Size Brig hton P195/60R15 87H L P205/60R15 90H
GT P205/55R16 89H
Temp orary sp are T135/70D16
Pressure
Front Brig hton 33 p si (230 kPa, 2.3 kg /c m 2
)
GT, L 32 p si (220 kPa, 2.2 kg /c m 2
)
Rear Brig hton 32 p si (220 kPa, 2.2 kg /c m 2
)
GT, L 30 p si (210 kPa, 2.1 kg /c m 2
)
Temp orary sp are 60 p si (420 kPa, 4.2 kg /c m 2
)
Wheel size 15 x 6JJ, 16 x 6 1
/2 JJ
OUTBACK
Typ e Steel b elted rad ial, Tub eless Size P225/60R16 97H
Temp orary sp are T145/80R16
Pressure
Front 30 p si (210 kPa, 2.1 kg /c m 2
)
Trailer towing 30 p si (210 kPa, 2.1 kg /c m 2
)
Rear 29 p si (200 kPa, 2.0 kg /c m 2
)
Trailer towing 32 p si (220 kPa, 2.2 kg /c m 2
)
Temp orary sp are 60 p si (420 kPa, 4.2 kg /c m 2
)
Wheel size 16 x 6 1
/2 JJ
Page 411 of 413
13-2For U.S.A.
The following information has b een c omp iled ac c ord i
ng to Cod e of Fed -
eral Reg ulations “Title 49, Part 575 ”.
Uniform tire quality grading standards
This information ind ic ates the relative p erformanc e of p asseng er c ar tires
in the area of tread wear, trac tion, and temp erature resistanc e. This is to
aid the c onsumer in making an informed c hoic e in th e p urc hase of tires.
Quality g rad es c an b e found where ap p lic ab le on the tire sid ewall b e-
tween tread should er and maximum sec tion wid th. For examp le:
Treadwear 200 Traction AA Temperature A
The q uality g rad es ap p ly to new p neumatic tires for use on p asseng er
c ars. However, they d o not ap p ly to d eep tread , win ter typ e snow tires,
sp ac e-saver or temp orary use sp are tires, tires wit h nominal rim d iame-
ters of 12 inc hes or less, or to some limited p rod u c tion tires.
All p asseng er c ar tires must c onfirm to Fed eral Saf ety Req uirements in
ad d ition to these g rad es. Treadwear
The tread wear g rad e is a c omp arative rating b ased o n the wear rate of
the tire when tested und er c ontrolled c ond itions on a sp ec ified g overn-
ment test c ourse.
For examp le, a tire g rad ed 150 would wear one and o ne-half (1-1/2)
times as well on the g overnment c ourse as a tire g r ad ed 100. The rela-
tive p erformanc e of tires d ep end s up on the ac tual c ond itions of their
use, however, and may d ep art sig nific antly from the norm d ue to varia-
tions in d riving hab its, servic e p rac tic es and d iff erenc es in road c harac -
teristic s and c limate. Traction AA, A, B, C
The trac tion g rad es, from hig hest to lowest, are AA , A, B and C. Those
g rad es rep resent the tire ’s ab ility to stop on wet p avement as measured
und er c ontrolled c ond itions on sp ec ified g overnment test surfac es of as-
Page 412 of 413
Consumer information and Reporting safety defects13-3
–
CONTINUED –
p halt and c onc rete. A tire marked C may have p oor t
rac tion p erfor-
manc e.
WARNING
The traction grade assigned to this tire is based on straight-
ahead braking traction tests, and does not include acceleration,cornering, hydroplaning, or peak traction characteristics.
Temperature A, B, C
The temp erature g rad es are A (the hig hest), B, and C, rep resenting the
tire ’s resistanc e to the g eneration of heat and its ab il ity to d issip ate heat
when tested und er c ontrolled c ond itions on a sp ec if ied ind oor lab oratory
test wheel. Sustained hig h temp erature c an c ause th e material of the tire
to d eg enerate and red uc e tire life, and exc essive t emp erature c an lead
to sud d en tire failure. The g rad e C c orresp ond s to a level of p erfor-
manc e whic h all p asseng er c ar tires must meet und er the Fed eral Motor
Vehic le Safety Stand ard s No. 109. Grad es B and A re p resent hig her lev-
els of p erformanc e on the lab oratory test wheel tha n the minimum re-
q uired b y law.
WARNING
The temperature grade for this tire is established for a tire that isproperly inflated and not overloaded. Excessive speed, under-inflation, or excessive loading, either separately or in combina-tion, can cause heat buildup and possible tire failure.
