10-42
HG0124
Lock pin
2. Grasp the wheel c over with b oth hand s b y the sp ok es and twist
sharp ly in a clockwise d irec tion until you feel the d etent loc king . After
twisting the wheel c over, make sure the wheel c over is loc ked
sec urely b y lig htly turning the wheel c over rig ht a nd left.
HG0126
NOTE When any of the wheels is removed and replaced for tire rotation or to change a flat tire, always check the tightness of the wheelnuts after driving approximately 600 miles (1,000 km). If any nut isloose, tighten it to the specified torque.
Maintenance and service10-43
–
CONTINUED –
Wheel covers (Regular type wheel covers)
n Removing the wheel cover
HGA012BA
Insert the wheel c over remover into the notc h p rovi d ed , and p ry the
wheel c over off. n Installing the wheel cover
HGA013BA
Alig n the valve with the valve hole in the c over, t hen fit the c over on
the wheel b y tap p ing your hand evenly around the c i rc umferenc e of
the c over. NOTE When any of the wheels is removed and replaced for tire rotation or to change a flat tire, always check the tightness of the wheelnuts after driving approximately 600 miles (1,000 km). If any nut isloose, tighten it to the specified torque.
