2000 SUBARU FORESTER towing

8-12Towing
If towing is nec essary, it is b est d one b y your SUB
ARU d ealer or a c om-
merc ial towing servic e. Ob serve the following p roc e d ures for safety.
Transporting your vehicle using a flat-bed truck
HS0161
This is the b est way to transp ort your vehic le. Use the following p roc e-
d ures to ensure safe transp ortation.
1. Shift the selec tor lever into the “P ” p osition for automatic transmis-
sion vehic les or “1st ” for manual transmission vehic les.
2. Pull up the p arking b rake lever firmly.
3. Sec ure the vehic le onto the c arrier p rop erly with safety c hains.
Eac h safety c hain should b e eq ually tig htened and c are must b e tak-
en not to p ull the c hains so tig htly that the susp e nsion b ottoms out.
Towing with the front wheels raised off the ground
WARNING
Never tow AWD vehicles (both AT and MT) with the front wheels raised off the ground while the rear wheels are on the ground, orwith the rear wheels raised off the ground while the front wheelsare on the ground. This will cause the vehicle to spin away due tothe operation or deterioration of the center differential.

In case of emergency8-13
–
CONTINUED –
HS0374
Towing with all wheels on the ground
WARNING
Never turn the ignition switch to the “LOCK” position while the
vehicle is being towed because the steering wheel and the direc- tion of the wheels will be locked. Remember that the brake booster and power steering do not
function when the engine is not running. Because the engine isturned off, it will take greater effort to operate the brake pedal andsteering wheel.
CAUTION
If transmission failure occurs, transport your vehicle on a flat-
bed truck. For AWD vehicles, the traveling speed must be limited to less
than 20 mph (30 km/h) and the traveling distance to less than 31
miles (50 km). For greater speeds and distances, transport your
vehicle on a flat-bed truck.

8-14
HS0163
We d o not rec ommend this method of towing . Use this method only
when towing servic e b y a SUBARU d ealer or a c ommerc ial towing
servic e is not availab le.
1. Chec k the transmission and d ifferential oil level s and ad d oil to
b ring it to the up p er level if nec essary.
2. Release the p arking b rake and p ut the transmissio n in neutral.
3. The ig nition switc h should b e in the “ACC ” p osition while the ve-
hic le is b eing towed .
4. Take up slac k in the towline slowly to p revent d a mag e to the ve-
hic le.
Towing eyelets
CAUTION
Never use the tie-down eyelet closest to the muffler under the
vehicle for towing purposes. Do not apply excessive lateral load to the towing eyelets.

In case of emergency8-15
–
CONTINUED –
HS0165
HS0164Towing and tie-down eyelets
Towing and tie-down eyelet
HS0166
Never use tie-down eyelet for towing purpose.
The towing eyelets should b e used only in an emerg e nc y (e.g ., to free a
stuc k vehic le from mud , sand or snow).

10-8
Changing the oil and oil filter
Chang e the oil and oil filter ac c ord ing to the main tenanc e sc hed ule in
the “Warranty and Maintenanc e Booklet ”.
The eng ine oil and oil filter must b e c hang ed more freq uently than
listed in the maintenanc e sc hed ule when d riving on d usty road s,
when short trip s are freq uently mad e when towing a trailer, or when
d riving in extremely c old whether.
1. Warm up the eng ine b y letting the eng ine id le for ab out 10 minutes
to ease d raining the eng ine oil.
2. Park the vehic le on a level surfac e and stop the eng ine.
3. Remove the oil filler c ap .
HS0174
Drain plug
4. Drain out the eng ine oil b y removing the d rain p l ug while the en-
g ine is still warm. The used oil should b e d rained into an ap p rop riate
c ontainer and d isp osed of p rop erly.
WARNING
Be careful not to burn yourself with hot engine oil.
5. Wip e the seating surfac e of the d rain p lug with a c lean c loth and
tig hten it sec urely with a new sealing washer after the oil has c om-
p letely d rained out.

Maintenance and service10-11
–
CONTINUED –
OM-H2756
SAE viscosity number and applicable temperature
Recommended grade and viscosity under severe driving conditions
If the vehic le is used in d esert areas, in areas wi th very hig h temp era-
tures, or used for heavy-d uty ap p lic ations suc h as a towing a trailer,
use of oil with the following g rad e and visc osities is rec ommend ed .
API classification SJ or SH:
SAE viscosity No.: 30, 40, 10W-50, 20W-40, 20W-50

10-40c ations. Chec k the tire p ressure when the tires are
c old . Cold means that
the vehic le has b een p arked for three hours or has b een d riven less than
1 mile (1.6 km).
HS0251
The rec ommend ed tire p ressure and sizes are p rovid e d on the tire p lac -
ard , whic h is loc ated und er the d oor latc h on the d river’s sid e.
Adjusting the tire pressure
The tire p lac ard shows the rec ommend ed tire p ressur es at lig ht load ,
at full load and when towing a trailer. If the vehi c le is load ed with three
oc c up ants or less, ad just the tire p ressure to the level rec ommend ed
for lig ht load . If the vehic le is more load ed , ad ju st it to the level rec om-
mend ed for full load . When towing a trailer, ad just it to the level rec -
ommend ed for that op eration.
Tire rotation
Tire wear will vary with eac h wheel. To inc rease th e life of tires and keep
wear uniform, it is b est to rotate them every 7,500 miles (12,500 km).
When rotating tires, rep lac e any unevenly worn or d amag ed tire. After
rotating the tires, ad just tire p ressure and b e sur e to c hec k wheel nut
tig htness.

Specifications11-3
–
CONTINUED –

Capacities
Fuel tank 15.9 US g al (60 liter, 13.2 Imp g al)
Eng ine oil 4.2 US q t (4.0 liter, 3.5 Imp q t)
Manual transmission oil 3.7 US q t (3.5 liter, 3.1 Im p q t)
Automatic transmission fluid 9.8 US q t (9.3 liter, 8.2 Imp q t)
AT d ifferential g ear oil 1.3 US q t (1.2 liter, 1.1 I mp q t)
AWD rear d ifferential g ear oil 0.8 US q t (0.8 liter, 0.7 Imp q t)
Power steering fluid 0.7 US q t (0.7 liter, 0.6 Imp q t)
Eng ine c oolant 6.6 US q t (6.2 liter, 5.5 Imp q t)
Tires
Typ e Steel b elted rad ial, Tub eless
Size P205/70 R15 95S
P215/60 R16 94H
Pressure Front
(lig ht load ) 29 p si (200 kPa, 2.0 kg /c m 2
)
(full load ) 29 p si (200 kPa, 2.0 kg /c m 2
)
Rear
(lig ht load ) 26 p si (180 kPa, 1.8 kg /c m 2
)
(full load ) 36 p si (250 kPa, 2.5 kg /c m 2
)
Trailer towing Front 29 p si (200 kPa, 2.0 kg /c m 2
)
Rear 41 p si (280 kPa, 2.8 kg /c m 2
)
Wheel size 15 x 6JJ, 16 x 6 1
/2 JJ
Wheel alignment
Toe Front 0 0.12 in. (0 3 mm)
Rear 0.04 – 0.16 in. (1 – 4 mm)
Camb er Front –0 15 ’
Rear –0 15 ’