2000 SKODA FABIA Valve

Downloaded from www.Manualslib.com manuals search engine FABIA 2000➤Inspection and Maintenance
InspectionEdition 09.04
S00.5301.14.2002-2 page 2 02
Pre-sales Inspection - (the Czech Republic)
Compare as-delivered condition of vehicle with order form Chapter
♦Engine fitted
♦Type plate in the engine compartment
♦Vehicle data sticker (compare with stamped identification number)
♦Colour of paintwork, badges, inscriptions
♦Seats (cover, colour) interior trim (colour)
♦Radio, speakers, aerial
♦Central locking system, anti-theft alarm system
♦Wheels, tyres
♦Sun roof
♦Vehicle log book - for completion: Operating manual and service plan (in the correct lan-
guage and with the correct edition data), a list of dealers, short introduction, technical da-
ta, other manuals (radio......) ) - all in the vehicle log book pouch
♦Other equipment (all equipment fitted in proper condition)
♦Vehicles in stock for more than 6 months: Change brake fluid
Inspections and operations to be completed
Vehicle (exterior)
–Plastic and rubber parts - cleanliness and damage
–Inspect bodywork and paintwork for damage02-7
–Check that all car keys and key number fobs have been provided; check that the sticker
for the key number for the electronic immobiliser is complete and legible
–Proper operation of door handles outside, door locks, child safety locks, door contact
switches and proper operation of all locks and keys (including spare keys), doors, boot lid/
tailgate, fuel filler cap, bonnet lock02-7
–Proper operation of anti-theft alarm system
–Tighten the wheel bolts to specified torque (steel and light alloy wheels 120 Nm), fit wheel
caps02-5
–Check the tyre inflation pressure (including spare wheel), if necessary correct the tyre in-
flation pressure, fit valve caps02-5
–Fit roof aerial
Engine compartment (from above)
–Check battery no-load voltage, recharge battery if necessary02-6
–Check tight connection of electric cables and plug connections (in particular battery ca-
bles)
–Inspect engine, gearbox, cooling system, brake system and fuel system for leaks02-3, 02-5
–Engine oil level (in-between markings on dipstick)02-3
–Brake fluid level (at „MAX“ marking)02-5
–Coolant level (in-between marking)02-3
–Fill up fluid in washer reservoir, in the winter add antifreeze
–Windscreen wiper/washer system and headlamp cleaning system: Check for proper oper-
ation02-7
Vehicle interior

Downloaded from www.Manualslib.com manuals search engine FABIA 2000➤Inspection and Maintenance
InspectionEdition 09.04
S00.5301.14.2002-2 page 3 02
Delivery Inspection (Export)
–Proper operation of seat belts, seat belt height adjuster, power windows and sun roof
–Inspect upholstery, interior trim, carpeting and footmats for cleanliness and damage
–Inspect all switches, all electrical components, gauges/indicators and controls02-6
–Radio: Inspect for proper operation, store stations, set clock, encode02-6
–Reset service interval display02-6
–Power windows: Inspecting positioning02-6
–Key switch for airbag deactivation, front passenger side: Check function „ON/OFF“ and
switch-over to the position „ON“02-7
–Fit net in luggage compartment (if available)
–Check the car tool kit, spare wheel and accessories, that they have all been supplied and
are properly secured
–Install the carpets supplied in the vehicle
–Perform a test drive
Underside of vehicle (on lift platform)
–Inspect underbody (underbody protection for damage)02-7
–Inspect for leaks and damage: Engine, gearbox, final drive, steering, brake system, axles,
joint boots. Check proper routing of the brake hoses and brake lines, fuel lines including
ventilation of the fuel system02-3, 02-5
–Inspect tyres and wheels for damage02-5
Concluding operations
–Interrogate fault memory of all systems, if necessary erase02-6
–Remove protective seat covers
–Remove recharging table (if affixed)
–Complete the service schedule, affix the vehicle data sticker in the Service Schedule to
the floor of the luggage compartment next to the spare wheel„Next Service Date“ sticker
and affix to the side of the dash panel on the driver's side, hand the card „Škoda Assist-
ance“ to the customer02-7
–Final inspection to ensure proper condition for handover to the customer
Inspections and operations to be completed Chapter
Vehicle (exterior)
–Plastic and rubber parts: Inspect for cleanliness and damage
–Inspect bodywork and paintwork for damage02-7
–Check operation of the tailgate lock and the fuel filler cap, door contact switch, operation
of the door handles, door locks and safety buttons, central locking from outside as well as
inside, child safety locks, ability to close all locks on the vehicle using all keys (including
the spare key)02-7
–Check operation of the anti-theft alarm system
–Tighten the wheel bolts to specified torque (steel and light alloy wheels 120 Nm), fit wheel
caps02-5
–Check the tyre inflation pressure (including spare wheel), if necessary correct the tyre in-
flation pressure, fit valve caps02-5
–Vehicles in stock for more than 6 months: Change brake fluid02-5

Downloaded from www.Manualslib.com manuals search engine FABIA 2000➤Inspection and Maintenance
EnginesEdition 09.04
S00.5301.14.2002-3 page 1 02
02-3 Engines
Engine overview
Engine
identifica-
tion charac-
tersARV AQV AWY AZQ AZE AZF
Emission
standardEU2 EU3 EU4,
EU2 DDK,
EU3 DDKEU4,
EU2 DDK,
EU3 DDKEU2 EU4
Manufactur-
ing
(from...throu
gh)01.01 ... 07.02 02.02 ... 05.04 01.03 04.00 ... 03.03
Displace-
ment in litres1,0 1,2 1,2 1,4
Output (kW
at rpm)37 / 5000 40 / 4750 47 / 5400 44 / 5000
Max. torque
(Nm at rpm)84 / 2750 106 / 3000 112 / 3000 118 / 2600
Bore (∅
mm)72 76,5 76,5 75,5
Stroke (mm) 61,2 86,9 86,9 78
Compres-
sion10 10,3 10,5 10
Hydraulic
valve clear-
ance com-
pensationXXX X
Mixture for-
mationSimos 3PB Simos 3PA Simos 3PD Simos 3PE Simos 3PB Simos 3PA
Fuel RON
(minimum)unleaded 95
1)unleaded 951)unleaded 951)unleaded 951)
Fuel CN
(minimum)--- -
Firing order 1-3-4-2 1-2-3 1-2-3 1-3-4-2
Exhaust gas
recirculation--X -
Ignition sys-
tem/fuel in-
jectionSimos 3PB Simos 3PA Simos 3PD Simos 3PE Simos 3PB Simos 3PA
Self-diagno-
sisXXX X
Catalytic
converterXXX X
Turbocharg-
ing--- -
Charge air
cooler--- -
Lambda
probeXXX X
Camshaft
adjustment--- -

Downloaded from www.Manualslib.com manuals search engine FABIA 2000➤Inspection and Maintenance
EnginesEdition 09.04
S00.5301.14.2002-3 page 2 02
1)Regular grade unleaded petrol (min. 91 ROZ) can be used although engine power output is slightly reduced.
Engine identifi-
cation charac-
tersAME ATZ AQW AUA BBY
Emission stand-
ardEU2 D4 EU4,
EU3 DDKEU3,
EU4,
EU2 DDK,
EU3 DDKEU4,
EU2 DDK,
EU3 DDK
Manufacturing
(from...through)08.99 ... 04.03 11.99 ... 07.00 08.00 ... 03.03 05.00 ... 03.02 03.02 ... 05.04
Displacement in
litres1,4 1,4
Output (kW at
rpm)50 / 5000 55 / 5000
Max. torque
(Nm at rpm)120 / 2500 126 / 3800
Bore (∅ mm) 75,5 76,5
Stroke (mm) 78 75,6
Compression 10 10,5
Hydraulic valve
clearance com-
pensationXX
Mixture forma-
tionSimos 3PB Simos 3PA Magneti Marelli 4LV
Fuel RON (mini-
mum)unleaded 95
1)
1) Regular grade unleaded petrol (min. 91 ROZ) can be used although engine power output is slightly reduced.
unleaded 951)
Fuel CN (mini-
mum)--
Firing order 1-3-4-2 1-3-4-2
Exhaust gas re-
circulation-X
Ignition system/
fuel injectionSimos 3PB Simos 3PA Magneti Marelli 4AV
Self-diagnosis X X
Catalytic con-
verterXX
Turbocharging - -
Charge air cool-
er--
Lambda probe X X
Camshaft ad-
justment--

Downloaded from www.Manualslib.com manuals search engine FABIA 2000➤Inspection and Maintenance
EnginesEdition 09.04
S00.5301.14.2002-3 page 3 02
Engine identification
charactersAMF AUB BBZ ASY
Emission standard EU3 EU4
EU2 DDK,
EU3 DDKEU4,
EU2 DDK,
EU3 DDKEU3
Manufacturing
(from...through)05.03 08.99 ... 05.02 05.02 08.99
Displacement in litres 1,4 1,4 1,9
Output (kW at rpm) 55 / 4000 74 / 6000 47 / 4000
Max. torque (Nm at rpm) 195 / 2200 126 / 4400 125 / 1600 - 2800
Bore (∅ mm) 79,5 76,5 79,5
Stroke (mm) 95,5 75,6 95,5
Compression 19,5 10,5 19,5
Hydraulic valve clearance
compensationXXX
Mixture formation Bosch PDE - injec-
torsMagneti Marelli 4LV Bosch VP
Fuel RON (minimum) -
unleaded 98
1)
1)Regular grade unleaded petrol (min. 95 ROZ) can be used although engine power output is slightly reduced.
-
Fuel CN (minimum) 49 - 49
Firing order 1-2-3 1-3-4-2 1-3-4-2
Exhaust gas recirculation X X X
Ignition system/fuel injec-
tionBosch PDE - injec-
torsMagneti Marelli 4AV Bosch VP
Self-diagnosis X X X
Catalytic converter X X X
Turbocharging X - -
Charge air cooler X - -
Lambda probe - X -
Camshaft adjustment - - -
Engine identification char-
actersATD ASZ AZL BMD BKY
Emission standard EU3 EU3 EU4,
EU2 DDK,
EU3 DDKEU4,
EU2 DDKEU4,
EU2 DDK
Manufacturing (from...through) 02.00 06.03 08.00 05.04 05.04
Displacement in litres 1,9 1,9 2,0 1,2 1,4
Output (kW at rpm) 74 / 4000 96 / 4000 85 / 5400 40 / 4750 55 / 5000
Max. torque (Nm at rpm) 240 / 1800 -
2800310 / 1900 170 / 2400 108 / 3000 126 / 3800
Bore (∅ mm) 79,5 79,5 82,5 76,5 76,5
Stroke (mm) 95,5 95,5 92,8 86,9 75,6

Downloaded from www.Manualslib.com manuals search engine FABIA 2000➤Inspection and Maintenance
EnginesEdition 09.04
S00.5301.14.2002-3 page 4 02
Engine fitted
The engine identification characters and serial number
are located in the front at the engine/gearbox joint.
In addition, a sticker with the engine identification charac-
ters and serial number is affixed to the timing belt guard.
Engine with identification characters ARV, AQV, AZE,
AZF, AME, ATZ and AQW.
Engine with identification characters AUA, AUB, BBY,
BBZ, BKY.Compression 19 19 10,5 10,3 10,5
Hydraulic valve clearance
compensationXX X X X
Mixture formation Bosch PDE -
injectorsBosch PDE -
injectorsBosch ME 7.5 Simos 3PG Magneti Marelli
4TV
Fuel RON (minimum) - -
unleaded 95
1)unleaded 951)unleaded 951)
Fuel CN (minimum) 49 49 - - -
Firing order 1-3-4-2 1-3-4-2 1-3-4-2 1-2-3 1-3-4-2
Exhaust gas recirculation X X - - X
Ignition system/fuel injection Bosch PDE -
injectorsBosch PDE -
injectorsBosch ME 7.5 Simos 3PG Magneti Marelli
4TV
Self-diagnosis X X X X X
Catalytic converter X X X X X
Turbocharging X X - - -
Charge air cooler X X - - -
Lambda probe - - X X X
Camshaft adjustment - - - - -
1)Regular grade unleaded petrol (min. 91 ROZ) can be used although engine power output is slightly reduced.
Engine identification char-
actersAT D A S Z A Z L B M D B K Y

Downloaded from www.Manualslib.com manuals search engine FABIA 2000➤Inspection and Maintenance
EnginesEdition 09.04
S00.5301.14.2002-3 page 18 02
Replace air filter element
–Open the filter housing.
–Replace the filter element and clean the filter housing.
–Close filter housing and check correct fitting.
Replacing the fuel filter (diesel engine)
♦Make sure no diesel fuel comes into contact with the
coolant hoses. If necessary clean the hoses immedi-
ately!
♦It is absolutely necessary to observe the oil disposal
instructions!
♦Observe the disposal instructions!
Removing
–Remove retaining clips -3-.
–Remove regulating valve -4- with the connected fuel
hoses.
–Remove fuel hoses -1- and -2- on the filter.Engine fitted Spark plug manufac-
turer's designationParts No. Electrode spacing
1.0 litre/37 kW NGK BKR 6ETA-10 101 000 065
AA1.0 mm
1)
1) Distance between earth electrode and spark plug insulator.
1.2 ltr./40 kW AWY NGK PZFR5J-11 101 905 600
1.0 mm1)
NGK ZFR 5P-G 101 905 617
0.9 mm1)
BOSCH F7 HER2 101 905 601 B
0.9 mm1)
BMD NGK ZFR 5P-G 101 905 617
0.9 mm1)
BOSCH F7 HER2 101 905 601 B
0.9 mm1)
Brisk DOX 15 LE 101 905 618
0.9 mm1)
1.2 ltr./47 kW BOSCH F7 HER2 101 905 601 B
0.9 mm1)
NGK ZFR5P-G 101 905 617
0,8 mm1)
1.4 ltr./44 kW Brisk DR 15 TC 101 000 060
AA0,8 mm1)
1.4 ltr./50 kW Champion RC-89 PYC 101 000 049
AC0.8 mm1)
1.4 ltr./55 kW AUA, BBY NGK BKUR 6ET-10 101 000 033
AA1.0 mm1)
BKY BERU 14F-7 HUR 2 101 905 603 B
0.9 mm1)
1.4 ltr./74 kW NGK BKUR 6ET-10 101 000 033
AA1.0 mm1)
2.0 ltr./85 kW NGK BKUR 6ET-10 101 000 033
AA1.0 mm1)
Note
1
2
3
4
S02-0323

Downloaded from www.Manualslib.com manuals search engine FABIA 2000➤Inspection and Maintenance
EnginesEdition 09.04
S00.5301.14.2002-3 page 19 02
–Unlock hooks -arrows-.
–Loosen the fuel filter and remove.
Installing
–Install new fuel filter.
–Lock hooks -arrows-.
–Fit the new O-ring for the regulating valve.
–Install regulating valve -4- with the connected fuel
hoses.
–Attach retaining clips -3-.
–Install the fuel hoses -1- and -2- and secure with hose
clamps.
The direction of flow is indicated with arrows (do not
switch connections).
–Inspect the fuel system for tightness (visual inspec-
tion).
Draining the fuel filter (diesel engine)
♦Make sure no diesel fuel comes into contact with the
coolant hoses. If necessary clean the hoses immedi-
ately!
♦Collect fuel in a suitable vessel!
♦It is absolutely necessary to observe the oil disposal
instructions!
–Remove retaining clip -2- and remove regulating valve
-1- with the connected fuel hoses.
–Unlock hooks -arrows-.
–Loosen the fuel filter and remove.
Note
Note
S02-0324
1
2
1
2
3
4
S02-0323