2000 RENAULT MEGANE ignition

Downloaded from www.Manualslib.com manuals search engine 2
1
QXBIUDB*T[G      3DJH 
MEGANE CABRIOLET NU 640-2C:\Documentum\Checkout
u640-2_eng_T2.WIN 24/2/2001 14:29-page5
2.05
GEAR LEVER HANDBRAKE POWER STEERING
To select reverse
(vehicle stationary)
Move the lever to neutral, then
position the lever in reverse.
Ring1has to be lifted up to the gear
lever knob to select reverse gear.
The reversing lights will illuminate
as soon as reverse gear is selected
(ignition on).To release:
Pull the lever up slightly, press
button2and then lower the lever to
the floor.
Theredwarninglightonthe
instrument panel will illuminate if
you are driving with an incorrectly
released handbrake.
To apply:
Pull the lever up.
The lever should travel about 10
notches to hold the car. Your vehicle
is fitted with self-adjusting rear
brake shoes and the handbrake
should only be adjusted during a
brake overhaul.
When the vehicle is
stationary, make sure
that the handbrake is
properly applied so that
the vehicle does not move
unintentionally.
Make sure the handbrake is
properly released when driving,
otherwise overheating may
occur.When power assisted steering is
fitted, never leave the steering
wheel on full lock when the vehicle
is parked as this may damage the
pump.
Never switch off the
ignition when travelling
downhill, and avoid
doing so when driving in
general (power steering and
brake servo will not function).

Downloaded from www.Manualslib.com manuals search engine QXBIUDB*T[G      3DJH 
MEGANE CABRIOLET NU 640-2C:\Documentum\Checkout
u640-2_eng_T2.WIN 24/2/2001 14:29-page6
2.06
ADVICE ON ANTI-POLLUTION AND HOW TO ECONOMISE ON FUEL, DRIVING
RENAULT is actively participating
in the reduction of pollutant
exhaust gas emissions and in saving
energy.
By virtue of its design, moderate
fuel consumption and initial
settings your Renault conforms to
current anti-pollution standards.
Technical design, however, cannot
achieve all. The fuel consumption
of your car and the level of pollutant
exhaust gas emissions are very
much within your control. Make
sure that your vehicle is maintained
correctly, use it carefully and watch
your driving style.Maintenance
It should be noted that failure to
respect anti-pollution standards
may lead to legal action being taken
against the vehicle owner. In
addition, the replacement of parts of
the engine, fuel supply system and
exhaust by parts other than those
originally recommended by the
manufacturer may alter your
vehicle such that it no longer
complies with anti-pollution
standards.
Have your vehicle checked and
adjusted by your Renault Dealer in
accordance with the instructions in
the vehicle’s servicing booklet.
Your Renault Dealer has all the
equipment necessary for ensuring
your vehicle is maintained in its
original standard.
Always remember that the emission
of pollutant fumes is directly linked
to fuel consumption.
Engine adjustments
• Ignition:This does not require
adjustment.
•Spark plugs:Optimum
conditions of use, performance
and output demand that the
specifications laid down by our
design office be rigorously
adhered to.
If the spark plugs have to be
changed, use the make, type and
gap specified for your vehicle’s
engine. Consult your Renault
Dealer for this information.
•Idling speed:This does not
require adjustment.
•Air filter:A choked element
hinders output and must be
changed.
•Injection pump setting:It must be
set to the recommended values.

Downloaded from www.Manualslib.com manuals search engine QXBIUDB*T[G      3DJH 
MEGANE CABRIOLET NU 640-2C:\Documentum\Checkout
u640-2_eng_T2.WIN 24/2/2001 14:29-page7
2.07
ADVICE ON ANTI-POLLUTION AND HOW TO ECONOMISE ON FUEL(continued)
Monitoring exhaust gas
The exhaust gas monitoring system
will detect any malfunctioning of
the vehicle’s exhaust gas
depollution system.
If this system malfunctions, toxic
substances may be released into the
atmosphere or mechanical damage
may occur.
This warning light on the
instrument panel will
indicate if there are any
problems with the system.
It illuminates when the ignition is
switched on and extinguishes
within 3 seconds.
- If it illuminates continuously,
consult your Renault Dealer as
soon as possible.
- If it flashes, reduce the engine
speed until the light stops
flashing. Consult your Renault
Dealer as soon as possible.
Driving
•Drive carefully for the first few
miles until the engine reaches its
normal operating temperature.
• Speed is expensive.
• “Snappy” driving uses a lot of
fuel: drive with a “light right
foot”.• Take your foot off the accelerator
pedal to slow down rather than
use the brakes wastefully and
judge the road well in advance.
• Avoid fierce acceleration.
•Donotoverrevtheengineinthe
intermediate gears.
Always use the highest ratio
possible without labouring the
engine.
On versions with an automatic
transmission, it is preferable to
keep your the gear lever inD.
•Donottrytomaintainthesame
speed up a hill; accelerate no
more than you would on the level.
Keep your foot in the same
position on the accelerator pedal.
• Double declutching and
accelerating before switching off
are superfluous actions in
modern cars.
• Bad weather, flooded roads
Do not drive through
floods if the depth of
water is above the lower
edge of the wheel rims.

Downloaded from www.Manualslib.com manuals search engine A
B
1
G
I
F
QXBIUDB*T[G      3DJH 
MEGANE CABRIOLET NU 640-2C:\Documentum\Checkout
u640-2_eng_T2.WIN 24/2/2001 14:30-page19
2.19
PROACTIVE AUTOMATIC GEARBOX
Selector lever1
The position of selector lever1is
indicated on the displayFon the
instrument panel.
P:Park
R:Reverse
N: Neutral
D: Drive in automatic
(Gears authorised: 1, 2, 3 and 4)
2: 2nd gear hold (gears authorised:
1, 2)
1: 1st gear hold
Position D3 or 3rd gear hold(Gears authorised: 1, 2, 3)
With the selector lever in position
D, press buttonB. A tell-tale lightI
will illuminate on the instrument
panel. Press buttonBagain to
deselect this position. (The tell-tale
light will extinguish.)
Note:When the tell-tale light is
illuminated, the system will
prevent 4th gear being selected.For safety reasons, certain positions
may not be selected until the
mechanism is unlocked: press
buttonA.
Only engage D or R when the
vehicle is stationary, with your foot
on the brake and the accelerator
pedal released.
Driving
With the gear lever in position Por
N, switch on the ignition.
With your foot on the brake pedal,
move the lever from positionPorN.
For safety reasons, to move out of P
position it is essential to apply the
footbrake before pressing the
unlocking buttonA.

Downloaded from www.Manualslib.com manuals search engine 2
3
QXBIUDB*T[G      3DJH 
MEGANE CABRIOLET NU 640-2C:\Documentum\Checkout
u640-2_eng_T3.WIN 24/2/2001 14:31-page3
3.03
MANUALLY OPERATED HOOD: OPENING
Before opening the hood
•Ensure that it is clean, as dust
particles may damage the outside
of the hood and the rear screen.
• Ensure that the hood is
completely dry, otherwise the
compression to which it is
subjectedwhenfoldedcould
cause marks and even spots of
mould in the long term.
• Make sure there is nothing in the
compartment where the hood is
to be stored.
Opening operations AtoF
described belowmust be
performed in the order givento
prevent damage being caused to
the bodywork.A-Switch on the ignition
Apply the handbrake2.B-Lowerhandle3andthenturnit
a quarter of a turn. Lift the
hood by up to 14 inches (35
centimetres) using handle3.
Move handle3down.

Downloaded from www.Manualslib.com manuals search engine 4
5
QXBIUDB*T[G      3DJH 
MEGANE CABRIOLET NU 640-2C:\Documentum\Checkout
u640-2_eng_T3.WIN 24/2/2001 14:31-page5
3.05
MANUALLY OPERATED HOOD: OPENING(continued)
F- Lower hood compartment cover
4and close it firmly. Make sure
that it is locked in position.Note:If the handbrake has been
released and the hood cover is not
properly locked, a bleep will sound.
Press down on the hood cover to
close it correctly.Operating incidents
When unlatching the hood
compartment cover, make surethe
ignition is switched on and the
handbrake applied.
If the hood compartment cover still
fails to open, it may be opened
manually by moving pull handle5
to the side (located in the luggage
compartment cavity).

Downloaded from www.Manualslib.com manuals search engine 1
433
QXBIUDB*T[G      3DJH 
MEGANE CABRIOLET NU 640-2C:\Documentum\Checkout
u640-2_eng_T3.WIN 24/2/2001 14:31-page6
3.06
MANUALLY OPERATED HOOD: CLOSING
Closing operationsAtoH
described below must be
performed in the order given to
prevent damage being caused to
the bodywork.
A - Switch on the ignition.
Apply the handbrake2.
Press switch1: the hood cover4
will unlock automatically. (If
this does not operate, refer to
the section below on
“Operating incidents”.)B- Raise the hood, lifting it by one
of the handles3.C- Raise the hood until it is
approximately 14 inches (35
centimetres) from the
windscreen.

Downloaded from www.Manualslib.com manuals search engine 65
QXBIUDB*T[G      3DJH 
MEGANE CABRIOLET NU 640-2C:\Documentum\Checkout
u640-2_eng_T3.WIN 24/2/2001 14:31-page8
3.08
MANUALLY OPERATED HOOD: CLOSING(continued)
G- From inside the vehicle, turn
handle5until it reaches the
stop and pull the handle until
the hood closes.
Turn it a quarter of a turn to
latch the hood in the closed
position.H- Fold down the handle so that it
is positioned flat against the
hood (to return it to its initial
position). Make sure the hood is
properly latched in the closed
position.Operating incidents
When unlatching the hood
compartment cover, make surethe
ignition is switched on and the
handbrake applied.
If the hood compartment cover still
fails to open, it may be opened
manually by moving pull handle6
to the side (located in the luggage
compartment cavity).