2000 RENAULT KANGOO Sheet Metal Work Workshop Manual

UPPER REAR STRUCTURE
Added side panel
44
44-23
3Use bolts and nuts of ∅ 6 mm and wide washers
for plating the panel at the side strip clampingholes.
16632S
Bb

UPPER REAR STRUCTURE
Side panel extender
44Side panel extender
INTRODUCTION
This part may be replaced in two ways:
1total replacement complementary to the side panel,
2partial changing complementary to the skirt and
lights mounting side panel rain channel.
In the operation described below, only descriptions of
the joints specific to the part concerned are given.
Information on parts to which this is additional, will be
dealt with in their respective sections (refer to
contents).
COMPOSITION OF THE PART FROM THE PARTS
DEPARTMENT
Part on its own.PARTS CONCERNED (thickness in mm):
1 Side panel extender 1
2 Side cross member 1
3 Lower lights bracket 1
4 Extreme rear cross member 1,2
5 Basic body side panel extender 1
44-24
G

UPPER REAR STRUCTURE
Side panel extender
44
44-25
1 - COMPLETE REPLACEMENT
764G1-16608
TOA14581R7
TOA14581R7
TOH14634R7
TOB14593R6
G

UPPER REAR STRUCTURE
Side panel extender
44
44-26
Moulding ∅ 5 mm
G

UPPER REAR STRUCTURE
Side panel extender
44
44-27
2 - PARTIAL CHANGING SPECIAL FEATURES
764G2-16646
CAA11536-2R7
G

UPPER REAR STRUCTURE
Side inner panel extender
44Side inner panel extender
INTRODUCTION
Replacing this part is an additional operation to the
rain channel lights support after a rear impact.
This operation may be carried out partially.
In the operation described below, only descriptions of
the joints specific to the part concerned are given.
Information on parts will be dealt with in their
respective sections (refer to contents).
COMPOSITION OF THE PART FROM THE PARTS
DEPARTMENT
Assembled part with hinge stiffener.
PARTS CONCERNED (thickness in mm):
1 Side inner panel extender 0.8
2 Lights support side panel rain channel 1.5
3 Rear floor extender 0.8
4 Basic body side panel lining 0.7 or
PRF4413
16629R
CAS13033R7
44-28
I

UPPER REAR STRUCTURE
Side inner panel extender
44
44-29
Moulding ∅ 5 mm
CAB11539-1R1
CAA11536-2R3CAA11536-2R6
I

UPPER REAR STRUCTURE
Upper rear corner stiffener
44Upper rear corner stiffener
INTRODUCTION
This part is changed in addition to changing roof with
cross member and inner panel.
In the operation described below, only descriptions of
the joints specific to the part concerned are given.
Information on parts will be dealt with in their
respective sections (refer to contents).
COMPOSITION OF THE PART FROM THE PARTS
DEPARTMENT
Part on its own.
PARTS CONCERNED (thickness in mm):
1 Upper rear corner stiffener 1
2 Side inner panel extender 0.8
3 Roof rear cross member 0.8
4 Lights support side panel rain channel 1.5
5 Roof inner panel extender 0.8
6 Basic body roof rear cross member 0.8
7 Basic body roof 0.8
8 Inner panel stiffener 0.8
764J1-16628
CAA11536-2R4
44-30
J