LOWER STRUCTURE
Semi-rear end cross member
41
141LOWER STRUCTURE
Semi-rear end cross member
INTRODUCTION
This part is changed in addition to changing the rear
end panel. It may be performed in two ways:
The separation operation should be carried out last,
when all the other links have been unhooked.
In the operation described below, only descriptions of
the joints specific to the part concerned are given.
Connections associated with the additional parts are
not taken into consideration. These connections will be
dealt with in their respective section (refer to contents).
COMPOSITION OF THE PART FROM THE PARTS
DEPARTMENT
Part assembled with:
– extreme rear cross member.
– lower central extender,
– striker support absorber,
– lower side extender,
– side cross member,
– side cross member stiffener,
– counter blade absorber.PARTS CONCERNED (thickness in mm):
1 Side panel rain channel light support 1.5
2 Lights lower bracket 1
3 Side cross member stiffener 1
4 Extreme rear cross member 1.2
5 Side cross member 1
6 Side panel extender 1
7 Rear floor extender 0.8
8 Lower central extender 1
9 Basic body rearend panel 1 Cut 1order a right or left demi-cross member,
Cut 2order the two demi-cross members
then fit them in (A) or (B). For this
operation, the use of the body jig bench
is vital.
41-1
P
