2000 RENAULT CLIO tow

A
I
18IUB*DT[G      3DJH 
X65 - CLIOC:\Documentum\Checkout\Nu607-8gb_T2.WIN 30/9/2000 11:04-page12
2.12
PROACTIVE AUTOMATIC TRANSMISSION(continued)
Economical driving
On the open road, always leave the
lever in positionD. Press the
accelerator pedal lightly to ensure
that the gears change automatically
at a low engine speed.
Never use positions D3, 2, 1 and the
snow position unless special
circumstances apply.
Parking the vehicle
When the vehicle is stationary,
whilst keeping your foot on the
brake pedal, place the lever in
positionP: the automatic
transmission is in neutral and the
drive wheels are mechanically
locked by the transmission.
Apply the handbrake.
Operating faults
• If the lever remains locked in P
when your foot is on the brake
pedal, the lever may be moved
manually.
To do this, unclip coverIand then
press the raised area (under cover
I)and,atthesametime,press
unlocking buttonAto remove the
lever from positionP.
Take the vehicle to your Renault
Dealer.
•While driving,if this
warning light illuminates,
there is a fault. Refer to
the
information on the “Instrument
panel” in section 1.
•Towing a vehicle with an
automatic transmission,refer to
the information on “Towing” in
section 5.

1
2
18IUB*ET[G      3DJH 
X65 - CLIOC:\Documentum\Checkout\Nu607-8gb_T3.WIN 30/9/2000 11:27-page24
3.24
ASHTRAYS - CIGAR LIGHTER
Ashtray
To open, lift cover1.
To empty the ashtray, pull the
assembly towards you and it will be
released from its housing.
Cigar lighter
Ignition on, press in the cigar lighter2.
It will click out by itself as soon as it
is ready. Pull it out to use it. After
use, replace it without pushing it all
the way in.

11
2
18IUB*ET[G      3DJH 
X65 - CLIOC:\Documentum\Checkout\Nu607-8gb_T3.WIN 30/9/2000 11:27-page27
3.27
LUGGAGE COMPARTMENT(continued)
Rear shelf
To remove, release the two return
cords1.
Do not place any objects,
in particular heavy or
hard objects, on the rear
parcel shelf. These may
pose a risk to the vehicle
occupants if the driver has to
brake suddenly or if the vehicle
is involved in an accident.Gently lift the shelf and pull it
towards you.
Refitting is the reverse of removal.
Built-in garment case2
This is located under the rear parcel
shelf and is closed by a zip fastener.
It can be used to store clothes.
The total weight of
luggage placed in the
built-in garment case
must not exceed 5 kg
(11 lbs).

A
A
B
18IUB*ET[G      3DJH 
X65 - CLIOC:\Documentum\Checkout\Nu607-8gb_T3.WIN 30/9/2000 11:27-page28
3.28
LUGGAGE COMPARTMENT COVER - SEPARATING GRILLE:utility versions
The luggage compartment coverA
is made up of three rigid sections.
There are three positions for use:
• The luggage compartment cover
Ain the unfolded position.
Do not place any objects,
in particular heavy or hard
objects, on the luggage
compartment cover. These
may pose a risk to the vehicle
occupants if the driver has to
brake suddenly or if the vehicle
is involved in an accident.• The luggage compartment cover
Ain the semi-folded out position.• The luggage compartment cover
Ais removed.
To remove it, place the luggage
compartment cover in the
semi-folded position. Grip the
luggage cover at each end and
pull it towards you.
Separating grilleB.

18IUB*DT[G      3DJH 
X65 - CLIOC:\Documentum\Checkout_47\Nu607-8gb_T5.WIN 16/10/2000 11:24-page1
5.01
Section 5: Practical advice
Emergency spare wheel .................................................................................................................................... 5.02
Tool kit (Jack - Wheelbrace - Wheel spanners, etc.) ...................................................................................... 5.03
Wheel embellishers .......................................................................................................................................... 5.04
Changing a wheel ............................................................................................................................................. 5.05
Tyres (tyre safety, wheels, winter precautions) ................................................................................. 5.06
¬5.08
Wiper blades ..................................................................................................................................................... 5.09
Replacing bulbs: ................................................................................................................................... 5.10
¬5.17
Headlights ........................................................................................................................................... 5.10 - 5.11
Fog lights ....................................................................................................................................................... 5.12
Rear lights ........................................................................................................................................... 5.13 - 5.14
Side repeaters ................................................................................................................................................ 5.15
Interior lights ...................................................................................................................................... 5.16 - 5.17
Battery ..................................................................................................................................................... 5.18 - 5.19
Fuses ....................................................................................................................................................... 5.20 - 5.21
Remote control locking device (replacing batteries) ..................................................................................... 5.22
System for cutting off the fuel supply in the event of a severe impact ...................................................... 5.23
Towing (breakdown - trailer) ................................................................................................................ 5.24 - 5.26
Fitting a radio/accessories .................................................................................................................... 5.27 - 5.28
Operating incidents ............................................................................................................................. 5.29
¬5.34

1
4
63
25
9
7
8
18IUB*DT[G      3DJH 
X65 - CLIOC:\Documentum\Checkout_47\Nu607-8gb_T5.WIN 16/10/2000 11:24-page3
5.03
TOOL KIT
The tool kit1is located in the
emergency spare wheel. It contains
a set of tools for various operations
on the vehicle: jack, wheelbrace,
screwdriver, towing ring, etc. and a
location for a set of bulbs.Wheelbrace9
Jack8
When replacing the jack, fold it
down completely before putting it
back into position.
The jack is designed for
changing a wheel. Under
no circumstances should
it be used for carrying out
repairs or to gain access under
the vehicle.
Embellisher spanner2
This is used to unclip the wheel
embellishers.
Wheel spanner4
This is used to lock or release the
wheel bolts.
Wheel bolt guide/Screwdriver
handle3
Wheel bolt guide
This is used to finish unscrewing
the wheel bolts or to begin to tighten
them. Always use the wheel
spanner to lock or release the bolts.
Screwdriver handle
Insert the appropriate screwdriver
attachment5or6(two
screwdriver attachments giving
four different end pieces) into the
screwdriver handle.
Towing ring7
Refer to the paragraph “Towing” in
section 5 for information on using
the towing ring.

18IUB*ET[G      3DJH 
X65 - CLIOC:\Documentum\Checkout_47\Nu607-8gb_T5.WIN 16/10/2000 11:24-page18
5.18
BATTERY breakdown
To avoid all risk of sparks:
- Ensure the “accessories” are
switched off before disconnecting
or reconnecting the battery.
- When charging is finished, switch
off the charger before connecting
or disconnecting the battery.
- Do not place metal objects on the
battery to avoid creating a short
circuit between the terminals.
Connecting a battery charger
Both battery leads must be
disconnected (engine switched off).
Do not disconnect the battery when
the engine is running.Follow the
instructions for use given by the
manufacturer of the battery charger
you are using.Only a well-charged and well-
maintained battery will have a long
and useful life and enable you to
start your vehicle's engine normally.
The battery must be kept clean and
dry and the terminals and clips
must be cleaned and coated with
anti-acid grease.
Have the battery's charging capacity
checked regularly:
• Especially if you use your vehicle
for short journeys or for frequent
town driving.
• If an abnormal amount of
electrolyte is used.
• When the external temperature
drops, it isnormal for the
charging capacity to decrease.In
winter, only use those electrical
components which are really
necessary.
• Finally, remember that the battery
charge decreases naturally owing
to a certain number of permanent
accessories on the vehicle such as
the clock or other accessories
fitted.When a large number of accessories
are fitted to the vehicle, have them
connectedafter the ignition switch.
In this case, it is advisable to have
your vehicle fitted with a battery
which has an increased nominal
capacity. Consult your Renault
Dealer.
If the vehicle is to be left stationary
for a long time, disconnect the
battery and recharge it regularly,
especially in cold weather. The
memories, radio etc. will then have
to be reprogrammed. The battery
must be stored in a dry and
ventilated area protected from frost.
Specific procedures may
be required to charge
some batteries. Consult
your Dealer.
Avoid all risks of sparks which
may cause an immediate
explosion and charge the battery
in a well-ventilated area. Risk of
serious injury.

1
2
23
2
5
4
18IUB*ET[G      3DJH 
X65 - CLIOC:\Documentum\Checkout_47\Nu607-8gb_T5.WIN 16/10/2000 11:24-page24
5.24
TOWING breakdown
The steering lock must not be
applied; the ignition key must be in
position “M” (ignition) allowing
lights and signals to be used (stop
lights and direction indicators).
The vehicle lights must be used at
night.
It is also important to observe the
towing conditions defined by the
legislation for the particular country
you are in. Do not exceed the towing
weight for your vehicle. Consult
your Renault Dealer.Only use the towing ring2(in the
tool kit1) and the towing points at
the front3and rear4. (Never use
the drive shafts.) These towing
points may only be used for pulling
the vehicle, never for lifting it either
directly or indirectly.Front towing point3
Rear towing point4
Unclip the cover5.
First screw in the towing
ring2by hand as far as it
will go. Then use the
wheelbrace from the tool
kit to finish tightening it.