1-3 6-Way Power Driver's Seat (If Equipped)
This switch is designed to
control the movements of
your seat cushion. It is
located on the left side of
the driver's seat cushion.
To move the seat closer to the instrument panel,
slide the switch forward. To move it farther away, slide
the switch rearward. To raise or lower the seat, push the
switch up or down. To raise or lower the front portion of
your seat, push the front of the switch up or down.
To raise or lower the rear portion of your seat,
push the rear of the switch up or down.
Manual Lumbar (If Equipped)
The knob that controls this feature is located on the
right side of the driver's seat, about halfway down the
seatback. Turn the knob clockwise to increase lumbar
support. Turn the knob counterclockwise to decrease
lumbar support.
1-4 4-Way Power Lumbar Driver's Seat
(If Equipped)
If your vehicle is equipped with this feature, there will
be a switch located on the left side of the driver's seat
cushion, in front of the reclining seatback lever. To
increase or decrease lumbar support, push the switch
forward or rearward. To adjust the lumbar support up or
down, push the switch up or down.
Heated Seat (If Equipped)
If your vehicle is equipped
with this feature, the heated
seat switch is located on the
center console, behind the
open storage bin.
Press LO to warm the seat to a lower temperature. Press
HI to warm the seat to a higher temperature. To turn this
feature off, place the switch in the center position.
