2000 NISSAN PATHFINDER coolant temperature

[x] Cancel search: coolant temperature

Page 53 of 265

NISSAN PATHFINDER 2000 R50 / 2.G Owners Manual 2 Instruments and controlsInstrument panel ....................................................... 2-2
Meters and gauges ................................................... 2-3
Speedometer and odomete

Page 57 of 265

NISSAN PATHFINDER 2000 R50 / 2.G Owners Manual Changing the display:
Push the reset knob to change the display as
follows:
ODO,TRIP A,TRIP B,ODO
Resetting the trip odometer:
Push the reset knob for more than 1 second to
reset the trip odometer to

Page 115 of 265

NISSAN PATHFINDER 2000 R50 / 2.G Owners Manual Operating tipsIKeep windows and sun roof closed while
the air conditioner is in operation.
IAfter parking in the sun, drive for two or
three minutes with the windows open to
vent hot air from the pass

Page 120 of 265

NISSAN PATHFINDER 2000 R50 / 2.G Owners Manual : Air flow mainly from foot outlets.: Air flow from defroster and foot outlets.
To turn the system offPush the OFF button.OPERATING TIPSIWhen the engine coolant temperature and
outside air temperature

Page 163 of 265

NISSAN PATHFINDER 2000 R50 / 2.G Owners Manual FREEING A FROZEN DOOR LOCKTo prevent a door lock from freezing, apply
de-icer or glycerin to it through the key hole. If
the lock becomes frozen, heat the key before
inserting it into the key hole.ANT

Page 177 of 265

NISSAN PATHFINDER 2000 R50 / 2.G Owners Manual tioner temperature control to maximum hot
and fan control to high speed.
3. If engine overheating is caused by climbing
a long hill on a hot day, run the engine at a
fast idle (approximately 1,500 rpm

Page 188 of 265

NISSAN PATHFINDER 2000 R50 / 2.G Owners Manual 8 Do-it-yourselfMaintenance precautions .......................................... 8-2
Engine compartment check locations ....................... 8-4
Engine cooling system ............................

Page 194 of 265

NISSAN PATHFINDER 2000 R50 / 2.G Owners Manual 3. Open the air release plug to drain the
coolant.
4. Flush the cooling system by running fresh
water through the radiator.
5. Close the radiator drain plug and engine
block drain plugs securely.
6. S
Page:   1-8 9-16 next >