2000 NISSAN MAXIMA light

[x] Cancel search: light

Page 66 of 239

NISSAN MAXIMA 2000 A33 / 5.G Owners Manual The front seats are warmed by built-in heaters.
The switches located on the center console
can be operated independently of each other.
1. Start the engine.
2. Select heat range.
IFor low heat, press

Page 67 of 239

NISSAN MAXIMA 2000 A33 / 5.G Owners Manual To cancel the Traction Control System (TCS),
push the TCS cancel switch. The indicator
will come on. Push it again to turn the
system back on.
See ªTraction control systemº in the ª5. Start-
ing an

Page 68 of 239

NISSAN MAXIMA 2000 A33 / 5.G Owners Manual The cigarette lighter element is an accessory.
A genuine NISSAN cigarette lighter unit can be
purchased from your local NISSAN dealer.
The cigarette lighter operates when the igni-
tion switch is in t

Page 69 of 239

NISSAN MAXIMA 2000 A33 / 5.G Owners Manual GLASSES CASEThe glasses case can be opened by pushing
the button.
WARNING
The glasses case should not be used
while driving so full attention may be
given to vehicle operation.
CAUTION
IDo not use for

Page 74 of 239

NISSAN MAXIMA 2000 A33 / 5.G Owners Manual AUTOMATIC SUNROOFThe sunroof will only operate when the ignition
key is in the ON position.
The automatic sunroof is operational for about
45 seconds, even if the ignition key is turned to
the OFF pos

Page 75 of 239

NISSAN MAXIMA 2000 A33 / 5.G Owners Manual WARNING
IIn an accident you could be thrown
from the vehicle through an open
sunroof. Always use seat belts and
child restraints.
IDo not allow anyone to stand up or
extend any portion of their body o

Page 76 of 239

NISSAN MAXIMA 2000 A33 / 5.G Owners Manual IThe drivers door is opened and then closed
while the key is removed from the ignition
switch.
IThe key is removed from the ignition switch
while all doors are closed.
The ceiling light will turn off

Page 77 of 239

NISSAN MAXIMA 2000 A33 / 5.G Owners Manual ILocking or unlocking the drivers door
IInserting or removing a key from the ignition
switch
These lights will turn on again when any of the
above operations is performed after the lights
have turned