2000 FIAT MAREA AUX

marea-marea vvvttnviiu miruuuCuuu ciilu iwnniCai data
2000 range © Index
00.
page
INTRODUCTION
- Identification data 1
- Weights 3
- Performance - Fuel consumption 4
- Dimensions 5
- Capacities 7
- Product specifications
FL Group 9
TECHNICAL DATA
Engine l^^) lev |^^) 20v
- Specifications 10
- Typical curves 11
- Cylinder block/crankcase and associ­
ated components 12
- Auxiliary shaft 17
- Cylinder head and valve gear compo­
nents 18
- Timing diagrams 22
- Counter-balance shaft 23
- Lubrication 24
- Cooling system 26
- Fuel feed system 26
- Special tools 27
Engine I^^JJTD
- Specifications 29
- Timing diagrams 30
- Supercharging 31
CLUTCH 32
GEARBOX AND DIFFERENTIAL 33
AUTOMATIC TRANSMISSION DIF­
FERENTIAL 35
BRAKING SYSTEM 36
STEERING 39
WHEELS 40
FRONT SUSPENSION 42
REAR SUSPENSION 44
ELECTRICAL EQUIPMENT 46
- Ignition 47
1 - Recharging 48
- Electronic injection/ignition 50
Copyright by Fiat Auto

Technical Data Marea-Marea Weekend
Engine: cylinder block/crankcase, crankshaft and associated 2000 range @
OO.io
DESCRIPTION Values in mm
CCO* Li 22.14-22.20
Main journals 0 54.507-54.520
21.72-21.80
63.705-63.718
0< 01 38.700-38.730
Auxiliary shaft bush housings
02 35.036-35.066
80.500-80.510
^ Cylinder liner
_oJI 0
82.000-82.010
B 80.510-80.520 82.010-82.020
80.520-80.530 82.020-82.030
X 9.7 12.5
0
0
80.452-80.462 81.952-81.962
80.459-80.471 81.959-81.971
80.468-80.478 81.968-81.978
Piston
0 0.4
12 Print n° 506.763/23

Marea- Marea Weekend
2000 range ©
Technical Data
Engine: auxiliary shaft
DESCRIPTION
16v
Values in mm
OO.io
0,
23
NO Q
•0D=Ljtr
Bushes for
auxiliary drive shaft
01
02
35.664-35.684
32.000-32.020
24
|02 eu
my i
Auxiliary drive shaft
bearings
01
02
35.593-35.618
31.940-31.960
1 0\ O Shaft DUSnes 1 -4-K- Crankcase seats
24-23 Shaft bearings
Bushes
0i
0
should always be interfetrnce
0.046-0.091
0 040-0.080
Copyright by Fiat Auto 17

Technical Data
Engine: lubrication
OO.io
Marea- Marea Weekend
2000 range ©
LUBRICATION - DESCRIPTION LUBRICATION - DESCRIPTION Values in mm
Engine lubrication circuit forced circulation, via geared pump
with cartridge oil filter in series
Oil pump: type gears
Pump operated through auxiliary shaft
Oil pressure relief valve incorporated in the oil pump
Full flow filter cartridge
Low oil pressure transmitter electrical
IlimBi between the edge of the gears
^^^•••F and the pump casing
JjOj^^^U between the upper edge of the
^^*^^B§ gears and the pump cover
Clearance between the bearing and the driven gear
Clearance between the drive gear shaft and the
housing in the pump casing
Oi p between drive gear
* * and driven gear
0 © J±
Operating pressure at a temperature of 100°C
when idling > 1 bar
at 4000 rpm > 4.5 bar
Pi 9.0-9.8 daN
31
9 1 Hi I H? P2 6.92-7.21 daN
H2 21
24 Print n° 506.763/23

Technical Data
Front suspension
Marea- Marea Weekend
2000 range @
00.44
Front suspension independent, Mac Pherson type with transverse lower track control arms secured to an
auxiliary crossmember. Offset coil springs and double acting, telescopic, hydraulic shock absorbers. Anti-
roll bar connected to the telescopic damper.
CLASSIFICATION OF SPRINGS ACCORDING TO VARIOUS VERSIONS AND ENGINE TYPES
VERSIONS
ENGINE TYPES
VERSIONS
Standard E C
Standard with ABS E C
With air conditioning D B
With air conditioning, ABS and all options D B
With air conditioning and ABS D B
Standard with automatic transmission D
Standard with automatic transmission and ABS D
With air conditioning and automatic transmission C
With air conditioning, ABS and all options C
With ABS (fitted as standard) B
With ABS (fitted as standard) and air condi­
tioning A
With ABS (fitted as standard), air conditioning
and all options A
SPECIFICATIONS OF VARIOUS SPRINGS
Coil springs A B C D E
Wire diameter mm 13.6±0.05 13.5±0.05 13.2±0.05 13.2±0.05
Number of effective coils 3.75
Coil direction Clockwise
Released spring height mm 449 448 434 425 413
Load under which spring height is .
173 mm am 432±17 417±17 397±16 353-383 336-364
The springs have been divided into two cate­
gories identifiable by a mark
yellow (*) for those with a height of >173 mm
under a load of:
green (*) for those with a height of <173 mm
under a load of:
432 daN 417 daN 397 daN 368 daN 350 daN
( ) Springs of the same type must be fitted
42 Print n° 506.763/23

Technical Data Marea
Rear suspension 2000 range (§)
00.44
Rear suspension independent with track control arms anchored to an auxiliary crossmember. Variable
flexibility coil springs and anti-roll bar. Gas shock absorbers with low friction coefficient lower bushes.
ENGINE TYPE lopi lev ICphov
Coil springs
Wire diameter mm 12.3 ± 0.1
Number of effective coils 5.93
Coil direction clockwise
Released spring height mm 316
Height of spring under a load of:
347-373 daN mm 184
Spring are divided into two categories,
identified by markings
yellow (1) for those: 360 daN height of mm
under a load of
> 184
green (1) for those: 360 daN height of mm
under a load of:
< 184
(1) Springs of the same type must be fitted.
Dampers
Make double acting, telesopic, gas
Open (start of damping action) mm 321 ± 2
Closed (iron against iron) mm 224 ± 2
Stroke mm 97
Anti-roll bar
Anti-roll bar diameter mm 17
44 Print n° 506.763/23

Marea Weekend Technical Data
2000 range o Rear suspension
00.44
Rear suspension independent with track control arms anchored to an auxiliary crossmember. Variable
flexibility coil springs and anti-roll bar. Gas shock absorbers with low friction coefficient lower bushes.
ENGINE TYPE
Coil springs
Wire diameter mm 12.3±0.1 12.8±0.1
Number of effective coils 5.93 5.93
Coil direction clockwise
Released spring height mm 320 322
419-445 daN mm
Spring height under
184 -
a load of:
432 daN mm -184
Spring are divided into two categories,
identified by markings
412 daN
yellow (1) for those: oT mm
>184 _
under a load of hpinht
432 daN a
of mm
->184
412 daN aJS* green (1) for those ot mm
<184 -
under a load of: _ hpiflht 432 daN a "eif£J ot mm -<184
(1) Springs of the same type must be fitted.
Dampers
Make double acting, telesopic, gas
Open (start of damping action) mm 321 ± 2
Closed (iron against iron) mm 224 ± 2
Stroke mm 97
Anti-roll bar
Anti-roll bar diameter mm 17
Copyright by Fiat A uto 45

Marengo 0 ™ Technical Data
2000 range Suspension and wheels
OO.o
Rear suspension independent with track control arms anchored to an auxiliary crossmember. Variable
rate coil springs and antiroll bar. Gas shock absorbers with low friction coefficient lower bushes.
ENGINE TYPE
Coil springs
Diameter of wire mm 13.9 ± 0.1
Number of coils 5.93
Direction of coil clockwise
Height of spring released mm 323
Height under 424 ± 456 daN mm a load of : 207
The springs are divided into two categories,
identifiable by a mark:
XX°l 440 daN having a heigh, of i -i x mm load of:
> 207
green (1) for having a height of those under a 440 daN a a i J x. mm load of:
^ 207
(1) When fitting, match springs of the same type.
Shock absorbers
Make double acting, telesopic, gas
Open (start of damping action) mm 321 ± 2
Closed (metal against metal) mm 224 ± 2
Travel mm 97
Anti-roll bar
Anti-roll bar diameter mm 19
FRONT SUSPENSION
Anti-roll bar
Anti-roll bar diameter mm 18
Copyright by Fiat Auto 3