2000 Citroen C5 AUX

Downloaded from www.Manualslib.com manuals search engine ENGINE
66
AUXILIARY EQUIPMENT DRIVE BELT
Engines : RHY - RHZ
With air conditioning (continued)
Refit.
Re-used belt.
- Compress the tensioner roller (7)by action at «c»(in anti-clockwise direction), tool [4].
- Refit the belt.
WARNING : Respect the direction in which the belt is fitted.
- Remove the tool [4].
New belt.
- Refit the belt.
- Turn the eccentric roller (5), tool [1](clockwise)to free the tool [2]from its pegging at «d».
- Hold the eccentric roller (5), tool [1], and tighten the screw (6)to 4.3 ± 0.5 m.daN.
- Remove the tool [2].
- Rotate the crankshaft 4 times in the normal direction of rotation.
- Check that it is possible to peg at «d», tool [3].
- If not possible to peg, restart the adjustment..
B1BP1YND

Downloaded from www.Manualslib.com manuals search engine ENGINE
67
AUXILIARY EQUIPMENT DRIVE BELT
Engine : 4HX
Without air conditioning
B1BP270DB1BP272D
TOOLS
[1] Dynamic tensioner compression lever: (-).0188.Z
[2] Ø 4 mmpeg : (-).0188.Q1
Remove.
WARNING :mark the direction of fitting in case the belt is to be reused.
- Compress the tensioner roller(1)by action at «a» (anti-clockwise), using tool [1].
- Peg at«b», using tool [2].
- Remove the auxiliaries drive belt.
Refit.
- Refit the auxiliaries drive belt.
- Compress the tensioner roller(1)by action at «a»(anti-clockwise), using tool [1].
- Remove the tool[2]at «b».

Downloaded from www.Manualslib.com manuals search engine ENGINE
68
AUXILIARY EQUIPMENT DRIVE BELT
Engine : 4HX
With air conditioning
B1BP271DB1BP273D
TOOLS
[1] Dynamic tensioner compression lever: (-).0188.Z
[2] Ø 4 mmpeg: (-).0188.Q1
Remove.
WARNING :mark the direction of fitting in case the belt is to be reused.
- Compress the tensioner roller(4) by action at «c»(anti-clockwise), using tool [1].
- Peg at «d», using tool [2].
- Remove the auxiliaries drive belt.
Refit.
- Refit the auxiliaries drive belt.
- Compress the tensioner roller(4)by action at «c»(anti-clockwise), using tool [1].
- Remove the tool [2] at «d».

Downloaded from www.Manualslib.com manuals search engine ENGINE
74
CHECKING AND SETTING THE VALVE TIMING
Engine : XFX
TOOLS
[1] Camshaft setting pegs(-).0187.B
[2] Crankshaft setting peg(-).0187.A
[3] Fuel pressure take-off union4192-T
[4] Belt retaining pin(-).0187.J
[5]Exhaust camshaft hubs immobilising tool(-).0187.F
[6] Inlet camshaft hubs immobilising tool(-).0187.F
Remove the auxiliaries drive belt (See corresponding operation).
Checking the valve timing setting.
Remove :
- The power steering pulley.
- The roller / dynamic tensioner assembly(11).
- The crankshaft pulley (12).
- The upper timing covers (9)and (10).
- The lower timing cover (13).
B1BP2BKC