34-131
12 -
Circlip
Installation position: eyes facing up
13 -
Switch for back-up lights, 20 Nm
14 -
O-ring For cover for selector shaftAlways replace
15 -
Cover for selector shaft Removing Page 34
-59
Installing Page 34
-85
16 -
Ball stud, 20 Nm
For connecting rod
17 -
Outer race for large tapered roller bearing
1) For drive pinionPulling out Fig. 1 , Page 35
-22
Pressing in Fig. 2 , Page 35
-22
and
Fig. 3 , Page 35
-23
Pa
ge 6 of 21 Transmission housin
g, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.34.10
34-144
Selector shaft (complete), disassembling
and assembling
1 -
Selector cylinder
2 -
Roll pin
Drive out and drive in flush Fig. 1
3 -
Selector shaft
Driving out Fig. 2Driving in Fig. 3Installation position: flat (arrow) and
selector finger - 4 - face in same direction
4 -
Selector finger Observe installation position to - 3 -
5 -
Cam for reversing light switch
Pa
ge 19 of 21 Transmission housin
g, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.34.10
