39-162
Performing check measurement
Checking dimension "r"
- Turn drive pinion at least 5 turns in both
directions.
- Insert universal mandrel and perform check measurement.
If the shims have been correctly selected, the dial gauge should now
show the value of "r" as marked on the ring gear, reading anti-
clockwise in the red scale, within a tolerance of 0.04 mm.
- Peen drive pinion nut with a punch.
Pa
ge 22 of 38 Drive
pinion and rin
g gear, ad
justin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.19
