39-96
Assembling
- Press grooved ball bearing into drive flange housing.
- Fit outer circlip.
- Pack space between sealing lip and dust lip of seal with sealing grease
G52 128 A1.
- Drive in seal onto stop.
Pa
ge 9 of 10 Drive flan
ge housin
g, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.12
39-97
- Insert inner circlip in drive flange housing and hold in position with
pliers; press in drive flange.
- Fit circlip in groove.
- Press sleeve onto drive flange as far as stop.
- Install cover cap with seal.
- Fit circlip.
- Install final drive support.
- Fit O-ring on drive flange housing.
Pa
ge 10 of 10 Drive flan
ge housin
g, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.12
