2000 AUDI A6 check oil

34-76


Installation position of synchro-hub for 5th and 6th gear:
Side with projecting face (arrow -1-) faces shaft end The oil drilling of the input shaft (arrow -2-) and the oil groove of the
synchro-hub (arrow -3-) are in line

-
Heat synchro-hub for 5th and 6th gear to approx. 100 C, fit and drive
on; ensure there is no play. - Check 6th speed sliding gear for axial play.
Pa
ge 25 of 38 Bearin
g housin
g, Torsen differential, end cover, internal selector mechanism, in
put shaft, drive
pinion and hollow shaft, rem...
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.34.5

34-81


- Drive on inner race for 5th speed sliding gear free of axial play.
- Oil needle bearing with gear oil and fit.
- Place synchro-ring for 5th gear in locking collar.
- Slide on 5th speed sliding gear with spring.

-
Heat 1st inner race for ball bearing for input shaft to approx. 100 C, fit
onto input shaft and drive onto stop; ensure there is no play. - Check 5th speed sliding gear for axial clearance.
Permissible axial clearance: 0.15-0.35 mm
- Insert dowel sleeves into bearing plate.
- Fit new gasket for end cover.
Pa
ge 30 of 38 Bearin
g housin
g, Torsen differential, end cover, internal selector mechanism, in
put shaft, drive
pinion and hollow shaft, rem...
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.34.5

34-84


- Guide oil collector from interior of end cover with support arm leading
through hole of end cover (arrow), until O-ring can be fitted from
outside onto oil collector.
- Lightly oil new O-ring and fit.
- Insert oil tube of oil collector into input shaft.

- Turn oil collector until the positioning segment is located in the
machined recess of the end cover (arrow).
- Press in oil collector onto stop.
- Slide assembly sleeve, Part No. 01E 311 120, onto selector shaft.
- Check neutral position of followers.
Selector gates must align.
Pa
ge 33 of 38 Bearin
g housin
g, Torsen differential, end cover, internal selector mechanism, in
put shaft, drive
pinion and hollow shaft, rem...
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.34.5

34-88

- Remove protective hose.

- Install release bearing, clutch release lever and
guide sleeve from Page 30
-27
.

- Check that transmission can be shifted through
all gears.

- Fit connecting rod.

- Check oil level in transmission Page 34
-39
.
Pa
ge 38 of 38 Bearin
g housin
g, Torsen differential, end cover, internal selector mechanism, in
put shaft, drive
pinion and hollow shaft, rem...
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.34.5