27-54
Vent valves, removing and installing
Follow the same procedure for both valves when removing and installing
the clutch pedal vent valve -1- and the brake pedal vent valve -2-.
Removing
Follow the sequence of operations below:
Installing
Note:
To ensure that the valve is seated firmly enough, the valve may only be
re-installed once. - Disconnect harness connector and vacuum line.
- Push or rotate vent valve out of its bracket.
Pedal in released position
- Push vent valve into bracket as far as stop (e.g. using 10 mm box
wrench); do not rotate it in.
Pa
ge 8 of 10 Cruise control s
ystem, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.27.4
