2000 AUDI A4 Air Bag Workshop Manual

48-68


Driver-side airbag unit (sport steering
wheel), removing and installing

WARNING!
Observe all safety precautions before starting
work on any part of the airbag system page
48
-62
.
1 -
Steering wheel
Removing and installing page 48
-70
2 -
Harness connector for spiral spring
3 -
Airbag unit
4 -
Multi-point socket-head bolt
Always replace60 Nm (44 ft lb)
5 -
Torx bolts (T30) 7 Nm (62 in. lb)
6 -
Torx bit socket (T30)
7 -
Self canceling ring, spiral spring and slip
ring
Pa
ge 9 of 11
11/20/2002 file://C:\DOCUME~1\Bear\LOCALS~1\Tem
p riPOIKA.ht
m

48-69


Removing
Installing
WARNING!
Make sure the passenger compartment is not
occupied before connecting the battery Ground
(GND) strap. -
Using Torx bit socket (T30) remove bolts
mounting airbag unit.
- Disconnect harness connector - 2 -.
- Place airbag unit down with padded side facing
upward.
- Make sure harness connector - 2 - engages
properly (with audible click).
- Install airbag unit and tighten bolts to 7 Nm (62
in. lb).
- Switch ignition on and connect battery Ground
(GND) strap.
Pa
ge 10 of 1111/20/2002 file://C:\DOCUME~1\Bear\LOCALS~1\Tem
p riPOIKA.ht
m

48-70


Sport steering wheel, removing and
installing

WARNING!
Observe all safety precautions before starting
work on any part of the airbag system page
48
-62
.
Removing
Installing
- Remove airbag unit page Page 48
-68
.
- Turn steering wheel to center position (wheels
straight-ahead).
- Remove bolt - 4 -.
- Install steering wheel in center position (wheels
straight-ahead).
- Replace bolt - 4 - and tighten to 60 Nm (44 ft lb).
- Install airbag unit page Page 48
-68
.
Pa
ge 11 of 1111/20/2002 file://C:\DOCUME~1\Bear\LOCALS~1\Tem
p riPOIKA.ht
m