45-10
Removing and installing:
- Disconnect battery Ground (GND) strap.
- Seal brake lines and connections
immediately with dummy plugs.
- Bolt new hydraulic control unit to bracket,
item 13 . Remove dummy plugs from
brake line connections. Brake lines
should be connected in accordance with
designations on hydraulic control unit.
Brake line tightening torque: 15 Nm (11 ft
lb)
- Bleed brake system page 47
-23
.
- Carry out high- and low-pressure test
page 45
-5 .
- Carry out On board Diagnostic (OBD)
Repair Manual, ABS/EDL/ASR On Board
Diagnostic (OBD), Repair Group 01. 11 -
Screw
15 Nm (11 ft lb)
Pa
ge 5 of 12 Anti-lock Brake S
ystem
(ABS
), Bosch 5.0
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU03.45.2
