39-12
Repair Manual, Suspension, Wheels, Steering, Repair Group 40; Drive
axle, removing and installing
Tightening torques - Install bolt for drive flange (arrow, 23 Nm) while securing drive flange
against turning, using a drift.
- Install drive axle.
- Install heat shield for right drive axle.
- Checking oil level in front final drive page 39
-1 .
Component
Nm
Drive flange to transmission 23
Drive axle to drive flange M10 77
Driveshaft to drive flange M8 39
Heat shield for driveshaft to transmission
23
Pa
ge 8 of 37 Front final drive, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.2
39-22
Installing left drive flange.
- Replace O-ring (arrow B) in drive flange mounting bracket.
Note:
When sliding in, left drive flange must be carefully guided by hand to
prevent damage to the double seal in transmission.
Repair Manual, Suspension, Wheels, Steering, Repair Group 40; Drive axle, removing and installing
- Check drive flange for sharp edges on transmission side of flange end
and if necessary, deburr.
- Insert left drive flange into transmission.
- Install drive axle.
- Install heat shield for left drive axle.
- Checking oil level in front final drive page 39
-1 .
Pa
ge 19 of 37 Front final drive, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.2
