34-6
40 -
Bolt
40 Nm (30 ft lb)
41 -
Nut 40 Nm (30 ft lb)
42 -
Bolt
43 -
4546Mounting bracket for pivot rod Revised after 06.96 Fig. 1
44 -
Tensioning ring
45 -
Boot
To remove and install, remove Three Way
Catalytic Converter (TWC) and heat shield Carefully pull over shift rod and pivot rodWhen installing, place on markings of shift
rod and pivot rod Pivot rod, fastening 06.96 Fig. 1
Pa
ge 6 of 18 Shift linka
ge, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.34.1
34-9
- Separate exhaust system behind Three Way
Catalytic Converter (TWC), if necessary remove
front exhaust system together with Three Way
Catalytic Converter (TWC).
Repair Manual, Engine Mechanical, Repair
Group 26
- Remove driveshaft Page 39
-71
.
Note:
Illustration shows manual transmission 012. - Remove shift rod (arrow -A-).
- Remove socket-head bolt on pivot rod (arrow -B-).
- Swing shift mechanism housing together with shift rod and pivot rod
downward and remove.
Pa
ge 9 of 18 Shift linka
ge, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.34.1
