39-86
Removing
Rear differential installed
Special tools and equipment
VW771 with 771/15 multi-purpose tool
VAG1306 drip tray
VAG1359/2 universal mounting
VAG1383A engine-/transmission hoist
- Place VAG1306 drip tray underneath
transmission and drain fluid.
- Remove rear section of exhaust system located
rearward of exhaust pipe clamp(s).
Repair Manual, Engine Mechanical, Repair
Group 26
Pa
ge 2 of 21 Drive flan
ge housin
g, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.11
39-87
- Remove heat shield above driveshaft.
- Remove heat shield next to rear differential.
- Check for factory color marking on driveshaft. If not, mark position of
driveshaft flange -A- to drive flange in rear differential -B- with color
marking.
- Remove mounting bolts from driveshaft flange.
Note:
If driveshaft cannot be pushed upward past flange, tie up driveshaft after
lowering the differential. When lowering driveshaft, protect it from
dropping and note the permissible bend angle of driveshaft Notes,
Page 39
-68
. - Tie driveshaft to mount for parking brake cable using wire.
Pa
ge 3 of 21 Drive flan
ge housin
g, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.11
