39-81
- Remove mounting bolts and shims of center
bearing.
The following shims are available - Align center driveshaft bearing so that dimensions -a- are same on
both sides.
- Measure dimensions -a-.
- Identify shims according to table. Part numbers parts catalogDimension -a- (mm)
Shim thickness (mm)
0-3.0 -
3.1-5.0 2
5.1-7.0 4
7.1-9.0 6
9.1-11.0 8
11.1-13.0 10 - Install selected shims on both sides.
Pa
ge 6 of 8 Drive flan
ge/driveshaft radial deviation, measurin
g and identif
ying
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.9
