39-78
- Remove front left bolt at crossmember for final
drive.
- Remove strap from 2024A engine sling and tighten with bolt -2- (M10 x
85 mm) at open bore. Position strap using approx. 5 nuts (M12) for
backing -1-.
- Secure VW387 dial gauge holder onto strap mounted in this position.
- Place dial indicator on inside machined surface of drive flange (arrow)
and set to "0" with with 1 mm preload.
- Turn differential simultaneously in one direction by turning rear wheels
(drive flanges right and left), until drive flange makes complete rotation.
- Identify greatest radial deviation on outer drive flange with color
marking (corresponds to largest dimension from pivot axis).
- Remove old color marking on drive flange.
- Install driveshaft Page 39
-74
.
Pa
ge 3 of 8 Drive flan
ge/driveshaft radial deviation, measurin
g and identif
ying
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.9
